Comments
-
ARMOR Z2 (NBG6817) can set one main SSID and three guest SSID per band (2.4GHz/5GHz). But wireless scheduling feature for whole band (2.4GHz or 5GHz), not able to use for only one SSID. Maybe you can refer to Zyxel Multy Series. It can set Internet time limits for devices by group.…
-
https://www.zyxel.com/support/download_landing/product/armor_z2_22.shtml?c=gb&l=en&pid=20160503102311&tab=User_s_Guide&pname=ARMOR%20Z2 ARMOR Z2 (NBG6817) has wireless scheduling feature. And it has powerful WiFi signal coverage (AC2600).
-
Not sure what kind of setting you did to cause this problem. Please reset your NAS520, then try again. Otherwise, please use Transmission to download torrent files.
-
Did you disable admin folder? I found the KB: https://kb.zyxel.com/KB/searchArticle!gwsViewDetail.action?articleOid=015998&lang=EN Did you try to download other torrent files? Is it the same? My NAS520, Download Service is working properly. Maybe you should check your setting or try to reset NAS520.
-
@bergmannap, To my knowledge, it cannot do this. If you wants to use 2 separate network, you need to connect 2 PLA5456.
-
Do you mean Multy App or ... ? Any screenshots?
-
As far as I know, ZYXEL NAS does not support the feature.
-
When you press the reset button for at least 5 seconds, do the LED starts to blink amber or anything happen on LED? Does the LED always solid white? Do you not able to add 2nd node?
-
What is the model name of your router? And firmware version is?
-
Here is FAQ about Blue Solid LED: https://homeforum.zyxel.com/discussion/1666/what-does-blue-solid-led-mean#latest When you added 2nd node failure, is there any message show on Multy App? Can you try to go to "Menu" > "Add Multy" > "Add Multy to", then add it again? What is the distance between your two nodes? I installed…
-
Do you mean when you tried to change the other one as primary node, you cannot install it? Only original primary can be installed? When you install the problem node, how's the LED status? Do you have another mobile phone to set up them? I found the FAQ, you can try to clear Bluetooth cache.…
-
What is the model name and OS version of your mobile phone? Are two nodes use wireless backhaul? Can you try to swap two nodes and reinstall them?
-
I think if you replace original modem/router, Multy X need to reset and reinstall to get new Internet configuration. :)
-
What do you mean "when I plug the modem into the Zyxel router the router does not pick up the signal."? How's the LED status of Multy X? When you replace modem from BTHub3 to V130, do you reset and reinstall your Multy X? Can you share the information about the connection of your network topology?
-
Just want to know is there any interference in your environment. Did you check it? Can you share the result of the screenshot? And what kind of device that you tested the speed? BTW, distance, network traffics, building site material, interference from other wireless devices and other adverse factors, may cause the speed…