faierbol

Hi guys archigraf, Triu can you please share your config file so i can compare it with mine? Thank you in advanced!!!

Hi guy archigraf, Triu can you please share your config file so i can compare it with mine? Thank you in advanced!!!

So, i made some progress using the bellow commands: eth0.ipaddr=192.168.1.191 eth0.serverip=192.168.1.139 addpart /dev/mem 8M@0x8000(kernelraw) addpart /dev/mem 8M@8M(kernel) netload="/dev/mem.kernel" tftp uImage.520.bin $netload bootm ${netload} It boots from the image but in the end, after restart i get bad magic number.…

sorry Mijzelf for the late reply, didn't had the time to check last couple of days, i was busy with some health related issues 

No luck, i have tried with both 82000000 or 2000000 Barebox-C2K >/ bootm 2000000 ERROR: out of memory

I will do it tonight and late you know the results

the image is the one shared by you https://zyxel.diskstation.eu/Users/Mijzelf/NAS/542/and it has 6.99 MB, i rename it to uImage.520.bin from uImage.520ABAG1C0.bin

Hi guys, Mijzelf archigraf, can you please give me a hand!

the image is the one shared by you https://zyxel.diskstation.eu/Users/Mijzelf/NAS/542/ and it has 6.99 MB i rename it to uImage.520.bin

Mijzelf as i said, is not documented unfortunately and i tried to follow the steps fond on the other threads but i think a couple of steps are missing or i dont understand them :(

HI Triu maybe you can help me with this, do you remember what exactly have you changed on the config file or what are the steps to flash the original firmware back? 

running the above steps gives me an error related to free space (out of space)

do i need to modify anything on the config file or just copy the uimage with tftp on the box and run: tftp -f uImage.520.bin -a 80010000 bootm 80010000

the thing is that the steps are not documented and i dont know what i am missing

Hi guys, Mijzelf archigraf, can you please help me with this!