jayd691  Freshman Member

PeterUK, Yes, it is very close to that except I have the AP connecting via a trunk port to the switch allowing all 5 vlans. The ports to the Flex 700 from the switch are untagged for the respective vlans and all other ports on the vlan are allowed with the rest forbidden. I would like to set it up with vlans on the Flex…

Thank you for the assistance Zyxel_Judy. I do know how to create the actual interface on the firewall and switch, but I am unsure of how to setup the firewall for the vlans. What do I use for the base port for the vlans? Do I create a network just for the firewall itself and then use that for the base port for all the…

I have all vlans but 70 in LAN zone, and vlan70 is in Guest Zone (created).

mMontana, 1: I have firmware version 4.70(ABMI.6)C0 installed. I did not see anything in the release notes for ABMI.7 that would appear to correct this issue (and I think it may be configuration) 2: No bandwidth control is being used on the firewall or on the switch? 3: The cables are the same used for both tests (560mbps…

Hi James, It is logged when the update is automatic, and it is a pop-up window and logged when I try to update it manually, which I found in the community resolved this issue previously. Jay

I have a USG Flex 700 running firmware version 5.31(ABWD0) which is having the same continuous error "2022-09-26 14:45:03 error myZyXEL.com Certificate download has failed.). I have tried unsuccessfully to perform the update manually, but it continues to fail that way as well. "SSL Certificate download has failed. (failed)…

1) No, there are no logs for the blocking of the Echo Dots. I was hoping to find a log that would allow me to filter the specific domain/site. 2) I will try this for the echo dots, but I really wanted to keep the filter working for everything else with it, without opening the IP up completely. Thank you for the assistance!

#USG FLEX TOGETHER ON NEBULA! Manage all of my equipment in one spot makes life so much easier!

I have another question. How do I allow the GS1920-24HPv2 switch to use the Flex 700 as the NTP server? I can use an outside time server, but I generally always use the firewall/router for the time for downstream devices. If I set the NTP server address to the Flex 700, the switch cannot update its time. Please bear with…