vidra  Freshman Member

I am having a similar issue wth my NFS, the app seems to be buggy. Dos your NFSv4 work instantly?

Sadly you can't do anything about this :/ . I had a similar issue so i used my raspberry pi as the server and I mounted nas as a drive.

Could mtu be the problem ( i can't set it higher than 1500 on nas) and I can not enable/find jumbo frames in web interface .Changed mtu to 9000 on all devices. Speed is the same. My load average is 3.76 which is a bit strange

I was using the same disk with NSA325 and I was getting full gigabit. Is there a way to set up ssd caching with nas542?Edit: I installed an SSD in to the NAS and the speed is the same (~50MB/s). So it is not the disk that is not preforming well.

That didn't work for me. I had to uninstall NFS and reinstall it to another disk to get it working.

WPS is a very big security risk, that is why Multy U does not have it. You have to connect your printer to a PC and then set up wifi from its setting

I have solved it, I have a NAS542 and I was on firmware 511 and I wanted to upgrade back to 521 and my web interface was broken

Yeah, i have found it. Thank you!

ftp://ftp2.zyxel.com/NAS542/firmware/ only lists 5.21

Can you please tell me where to get the 5.11 firmware?Should i just go to firmware -> manual upgrade -> choose 5.11-something-.bin and press upgrade after: </code><code>su<br>echo 1 > /firmware/mnt/info/revision