Комментарии
-
unsure whether unpacking the firmware file might cause any issues. When upgrading the firmware, I will ensure to keep the original file naming intact.
-
Armor behind modem? Does Armor receive its IP address from the modem's DHCP server, or does it require a PPPoE connection to obtain an IP? If it uses DHCP, you might consider assigning Google's DNS (8.8.8.8) to the client. If using PPPoE, ensure to verify if the dialing process is successful or not.
-
When you remove Lan2 but only leave Lan1, will the port not available to access?
-
Are you using a client outside of the device? You can check the firewall rules on the router, or see if any settings only allow LAN clients to access the WAN interface.
-
There is a topic provides the firmware before.
-
As I remember the NAs model was not able to find on myzyxel.com The NAS should be registered on mycloud.
-
Which model you are mention? Device is not able to run expectly after reset, try on different environment may help to know what would be the issue.
-
Nas 542 has a power scheduling feature for the NAS itself, but as I know no feature for the hard drive.
-
Since you are using JBOD, the two disks are completely separate and will not interfere with each other. To check the usage of each disk, you may need to SSH into the device as root and use the command "df" after logging in as root. The password required may be your admin password.Раздел: NSA 325 v2: How can I find out on which hdd the NAS-system is installed? Комментарий от suisei 21 мар
-
You have done the USB firmware recovery as provided by mijzelf. However, the symptoms persist. What I would try under this condition, I will remove the disk and boot up the NAS to see if the unit functions properly if I have backed up data.Раздел: My NAS540 is completely offline, what are steps to determine issues? Комментарий от suisei 20 мар
-
You can press the reset button and wait until you hear one beep, indicating that the password has been reset and the IP address released. Afterward, you can check again to see if the NAS can be assigned by the router normallyРаздел: My NAS540 is completely offline, what are steps to determine issues? Комментарий от suisei 19 мар
-
You can find it out by checking the status on web GUI. And check if the RAID is configured on your NAS. If RAID is not configured, likely, each disk operates independently, meaning the operating system files could potentially be on either disk. Always remember to handle disks with care and ensure that you have proper…Раздел: NSA 325 v2: How can I find out on which hdd the NAS-system is installed? Комментарий от suisei 18 мар
-
If you have a router accessible and can determine the IP address assigned to the NAS, you may attempt to change the NAS's IP address and then access it again once the new IP address has been assigned.Раздел: My NAS540 is completely offline, what are steps to determine issues? Комментарий от suisei 18 мар
-
You can use the app to select the file, click 'Share,' and then enter the email address of the recipient you'd like to share with.