評論
-
@gholmerYou can find the speedtest result in this post. https://community.zyxel.com/en/discussion/1788/new-usg60w-very-slow-2-4-5-ghz-wireless-speed-only-24-mbps
-
Do you want zywall to do DNS lookup by recursion root servers assuming the DHCP server does not provide DNS options?
-
Found one IPS signature on the device. Not sure if it can block wpad in your network. You can have it a try. There are also some suggestions for prevention of wpad…
-
The difference between virtual server and 1:1Nat. https://kb.zyxel.com/KB/searchArticle!gwsViewDetail.action?articleOid=016308&lang=EN
-
ActiveSync uses port 443. Make sure the management port of flex 200 doesn't not conflict with 443. Here is a similar post. Follow the steps to change the management port of flex 200 to another. https://community.zyxel.com/en/discussion/951/mobile-devices-cant-connect-to-exchange-server
-
My iPhone(iOS 15.6) has no problem connecting to managed ap after usg60w is upgraded to 4.72 WK28. Is your NWA5123-AC managed by usg60w successfully?
-
@ChnochiYou need to add a static route on the device (192.168.0.1) just like PeterUK suggested.destination IP: 192.168.1.0subnet mask: 255.255.255.0gateway IP: 192.168.0.x (the wan IP of Zywall USG-20W)
-
Try to capture packets and check if fortigate 200E can receive esp packets from ZyWall USG 300.
-
Time zones do not affect Google Authenticator’s mechanism, as it uses the Unix coordinated universal time (UTC) timestamp internally.https://github.com/scheb/two-factor-bundle/issues/56
-
Just curious about the packets. Why 192.168.53.2 reply to port 53795, 42569 and 57317 while no previous packets asking from 192.168.53.1? I guess that's why 192.168.53.1 deny unknown packets. Is your USG behind a nat router?
-
224.0.0.1 is multicast traffic. Similar discussions https://community.zyxel.com/en/discussion/1886/access-block-to-224-0-0-1-without-source-every-2-minutes-and-5-secondshttps://community.zyxel.com/en/discussion/1946/usg60-broadcast-224-0-0-1
-
The same question as these two posts. Find the suggestion and the latest…
-
@NemesisHere is a document from zyxel support agent last year. See "Set up the Host to Network VPN Tunnel on the Ubuntu 18.04" for the commands on Ubuntu.
-
On usg, add a domain zone forwarder and set private dns server. On AWS, a policy route to usg's vti interface needs to be configured, I guess.
-
Does it help? Not sure download links are still available. http://drivers.downloadatoz.com/vendor_other_type_firmware/54941,zyxel-dma-2500-firmware-1-02/download.html