Best Of
Re: NWA50AX & NWA55AXE Email Log option disappeared
Hi @NickU
There are two methods you can refer to stop the e-mail send from the AP.
Method 1:
SSH to AP and use the CLI below
Router> enable
Router# configure terminal
Router(config)# daily-report
Router(config-daily-report)# no activate
Router(config-daily-report)# exit
Router(config)# exit
After that, you can use CLI to check the daily report status:
Router# show daily-report status
Other CLI related to the Email Daily Report, you can refer to the attachment.
Method 2:
Downgrade the firmware to 6.25 patch 10, going to Configuration > Log & Report > Email Daily Report > Untick Enable Email Daily Report
And then, upgrade the latest firmware version to use.
Re: Any firmware updates for Armor G5
Hello @Anonym
Welcome to the forum.
Are you able to post a list of the promised features that you think are not working or are missing from the Armor G5 please?
This would allow people who work for Zyxel to respond and say whether they will ever be implemented or not.
Re: USG Flex 100 L2TP VPN not letting me access shared folders of the LAN
"Everyone" is only local access via File & Folder Security Access (Share access or file/folder Rights). Does the server have its own OS Firewall and is that Firewall configured to allow traffic from 192.168.50.0/24 (foreign subnet)? Note also that some systems consider legacy services unsafe and can block them by default.
Re: USG Flex 100 L2TP VPN not letting me access shared folders of the LAN
Does your server allow the communication to 192.168.50.0/24?
mMontana
Re: Nebula Cloud Authentication 802.1X RADIUS server questions
Hi Matt,
Hope that some customers'll share with you their experience when using Nebula Cloud Authentication.
By the way, to know about benefit and configuration of WPA enterprise with Nebula Cloud Authentication, please refer to this link.
Re: IPSEC VPN with SNAT in a little subnet
I have a setup like this it make hard time working out problems.
On Outbound Traffic source NAT you have source subnet the same size as SNAT? And changed Destination NAT?
PeterUK
Re: 50% packet loss after cable modem upgrade???
That's tonight's task. Been on phone with ISP for hours because, of course, since we can't reproduce with a single laptop connected to their modem - not their problem even though the packet loss clearly starts at their x.x.x.1 gateway. Trying to get them to understand that there's clearly some 'trigger' 5-30 minutes after we reset the WAN link and our business traffic clearly is the trigger. So a singel laptop may never trigger it, but our business clearly does. Will keep you all posted!
itxnc
Re: IKEv2 VPN with AD authentication problem
Thanks! That was what I forgot to fill in.
Re: Zyxel nwd6602 5g network do not apper using android 5g acces point
It's unclear why your Wi-Fi adapter can't detect the 5G Wi-Fi broadcast from your Android mobile. Not all Wi-Fi adapters are compatible with all devices, and some may not work with certain types of phones or operating systems. Additionally, the sharing station on the mobile device may have network configurations that aren't compatible with the Wi-Fi adapter, such as security settings or network protocols that the adapter doesn't support.
You could try broadcasting the Wi-Fi signal from other Android mobiles and see if the adapter can detect the SSID in the wireless network. If the adapter can detect the SSID from another mobile, it's likely a compatibility issue between the adapter and the mobile.
Re: Zyxel nwd6602 5g network do not apper using android 5g acces point
okimarukas: some 5g fiber routers are seen.
tonygibbs16: Phone supports, when u create a hotspot u have to chose 2.4g or 5g AP
AbeAlpha