Best Of
Re: How to change location address of Access Points
The initial AP address was judged by your ISP. You can change the device location by two methods.
Method 1. Get my location by manually adjusting
Going to Access point > Device > Access points > Choose AP > Map, then move the AP icon to the new location. There is an announcement as “Device location updated” after you finish moving AP icon.
Method 2. Get my location from web browser.
Going to Access point > Monitor > Access points > Choose AP
Click Position device > Choose Get my location from web browser > Click Update
Click Edit icon
Type Address > Click Save
The "Move map marker" box will be checked automatically.
Re: Change configuration
There is no configuration to change the setting from 100M to 1000M. The uplink alert based on the current uplink status.
Recommend you changing a cable/ the port that problematic AP connected to check whether the issue solved.
Re: Monitor internet usage per IP
Hi @kaissi ,
Please kindly find the follwoing screenshot statistics and choose the interface as LAN.
You will see the trafic statistics of internet traffic
Thank you
Re: USG Flex Object Creation
Hi @MikeInCincy ,
Greeting Forum, Thanks your advice.
We've put these requirements into queue and evaluated.
Thank you
Re: Any ONU not working in Zyxel OLT-1308S-22
Hi sir,
As I remember ZYXEL EPON products were EOL since 2018 and they move to GPON/XGSPON technologies.
From their website seems cannot find the EPON solution.
Nikki
1