Problem with update ZyWall USG-100Plus to firmware 330 AACV v3.30P9 (WK48)

Hi @a1601, could you please re-upload the firmware file, I need that specific file too, Thank in advance

Could you please @a1601 update again? I have some problems updating my USG100-PLUS

Hi @a1601 do you ave any previous version?

This is my actual:

BootModule Version: V1.17 | 12/01/2011 05:20:17
DRAM: Size = 256 Mbytes

Kernel Version: V2.4.27 | 2014-09-22 13:31:25
ZLD Version: V3.30(AACV.6) | 2014-09-29 07:40:36

using your file I got this error:

Booting...

Now booting kernel in FLASH
BM cmd line: console=ttyS0,115200 root=/dev/ram init=zyinit "-f -l 192.168.1.1 -r /dev/sda", address: 0x100000

intird start:0000000084136000 size:00000000000781A3

vmlinux start:0000000084006000 size:000000000012FD5C

Uncompressing Linux...done.
mount: fs type sysfs not supported by kernel

Connect a computer to port 6 and FTP to 192.168.1.1 to upload the new file.

Firmware received ...
Start to check file system...
Done

Building ...

[Update Filesystem]
Updating Code
/rw/compress.img bad CRC d05c62e9 (should be d6eda5d8)
(may instead be incorrect password)

Thanks for your help

Claudio