Best Of

Re: Managed AP NWA5123-AC-HD on USG60 slow, but speed with WAC6103d-i is ok

Simple question: did you audit your environment for already used 5Ghz channels? You picked 100 straight, i suppose there is a metric for that.

Moreover.
I don't manage any NWA-5123-AC-HD system but i setup a bandwidth limit on clients (SSID profile)

and also as default for 5GHZ networks there's a fixed multicast rate (radio profile)

mMontana

1

Re: I cannot connect to my GS1900-8hp

Hi @Peter Tselios

make sure no dhcp server is connected (i.e. router etc.) to your switch, then try to factory reset again and check if 192.168.1.1 responds to ping. No specific port is needed at default.

Also you could download ZON utility from zyxel website to set a specific ip on the device

Hope this can help

Fred

Fred_77

1

Re: in app push not working

https://community.zyxel.com/en/discussion/comment/49361#Comment_49361

Thanks Melen. I confirm this is working.

Thanks alot

Lucky

1

Re: Bought a NR5101 from Zyxel Store, can't get support.

Its probably an issue with their database for the lookup of the serial numbers. Try contacting them directly via E-Mail support@zyxel.eu

BrandSafway

1

Re: Internet connection problem with new Nebula FWA510 5G router

Hi Anders K

I also had the same problem as you. I figurezout that the reason was the missing APN setting. You have to set the APN setting to manual, and then put in your operators APN data manually. In my case I am using 3mobile and therefor I have to put in : bredband.tre.dk as the APN adresss… then you try again and i works.

If uou have another operator you can find the specific APN setting at the operators web site…

Peter0291

2

Re: NR7101 Zyxel Air app wont connect

Installed Zyxel Air and opened Air app, this screen shows up.

I'm connected to my home network not Unit wifi.

Screenshot_20230305_092612_Zyxel Air.jpg

Tap screen and Quick Setup screen shows up.

Screenshot_20230305_092620_Zyxel Air.jpg

Tap get started....

Screenshot_20230305_092627_Zyxel Air.jpg

Tap manual set up.

Screenshot_20230305_092636_Zyxel Air.jpg

Fill in ip and tap connect.

Screenshot_20230305_092700_Zyxel Air.jpg

Write password you use in your home network and tap login.

Screenshot_20230305_092710_Zyxel Air.jpg

SELBERG

1

Re: NR7101 Zyxel Air app wont connect

Hi Selberg, Thanks for this, I had been through all of this a dozen times but the Login button wasnt allowing me to click it. I have now found a fix after a lot of messing. I uninstalled the Cellmapper app and switched off Bluetooth, I was then able to login and the app is working. Thanks for the help.

mcoops

1

Re: Ubiquity vs USGFlex700

Thats where your going wrong when I say “one port on Zywall and VLAN the other subnets on it” I mean use ONE port like GE6 add a VLAN ON GE6 and another VLAN ON GE6 you don't need GE7 or 8

PeterUK

1

Re: Difference between Zywall 110 and USG 110

My reply may not be exactly what you asked for, but it is as close as I could get on short notice. A similar question was asked and replied to in the following discussion from 2020-01-23:

https://community.zyxel.com/en/discussion/3768/zywall110-or-usg110-are-they-able-to-use-the-same-config

TrondBKSuleimanCo

1

Re: Accessing shared folders over IPSec Site to site VPN

https://community.zyxel.com/en/discussion/comment/50103#Comment_50103

Yes that could be one reason because you don't have either USG having the WAN IP behind other NAT routers that you need to forward ports.

Have you a rule to allow inbound UDP port 500, 1701, 4500 and protocol 50 from WAN to Zywall?

PeterUK

1