Best Of
Re: LTE5388-M804 loses network after some time
Today after 24h of working correctly, Ip changed and "kern.debug udhcpc: Sending discover..." messages started again, with no connection.
sysjohn
Turn off Status LEDs
Dear ladies and gentlemen,
I am planning to buy a managed switch. Is it possible to switch off the LEDs on the GS1200 models? For me this is a required feature since I don't want to be distracted by blinking lights.
Best regards
Tissi
Tissi_2
Re: LTE5388-M804 loses network after some time
@sysjohn Hum, I think this is not the same issue here: in our case most of the time a configuration change can fix the issue, and a full reboot 100% fixes the issue.
Btw, here is the same issue with NR7101 :
I have reproduced the issue this night, and the last messages I got in log was "daemon.info dnsmasq-dhcp: sendLeaseMessageToESMD" about 15 minutes after IPv4 adress has changed. Again, the existing TCP OpenVPN tunnel was still active and running fine, but I wasn't able to ping any other IPv4 address. I will try to reproduce the bug several times this weekd to export log at each point.
Nebula CC Upgrade Notification - 2023-04-17 00:20 ~ 01:27 (UTC+0)
Dear Nebula Users,
The system will temporarily unavailable due to the upgrading.
Reason:
Nebula Control Center will be upgrading to release 17.00.
Started from:
2023-04-17 00:20 AM (UTC+0)
Completed:
2023-04-17 01:00 AM (UTC+0)
2023-04-17 01:13 AM (UTC+0)
2023-04-17 01:27 AM (UTC+0)
Affected scope & Risk:
- All users will be force logout from Nebula Control Center and inaccessible during the progress.
Note: This maintenance event does not affect Nebula devices and their local network services.
If you observed any issues after the maintenance, please contact @Zyxel_CSO
Zyxel Nebula Support
Re: Zyxel LTE5398-M904 connected to the cellular network but no Internet access
Hum, you're right: it's not related with DHCP renewing the IPv4 address and my guess was wrong unfortunatly (I enabled IPv6 and all was working since 3 days, so I was hoping it could be an IPv4 issue and that IPv6 could be a workaround). Alas, I've just had the issue back today (no Internet access and cellular network ok), and changing the band configuration like I do usually to force cellwan to restart was not helping this time (same log cycling and no IP adress assigned).
However, there is something really really strange: I have a tcp VPN established 24/7 to connect 2 networks and albeit internet was down, this tcp VPN connection was still working and I was able to manage a distant server. Next time I'll try to ping a known fixed IP address and to try restart the VPN…
(I have installed the latest firmware published a few days ago, no difference with the previous one)
Re: GS1900-10HP Configuration Failure Reset did not work
Maybe your switch gets an ip from a DHCP server (router?) on your network?
You could try to disconnet all cables except your management PC and reset again; if no dhcp service is available, switch should boot up with default ip 192.168.1.1
Hope this can help
Fred
Fred_77
Re: More colors in log
Mario
Re: 5g nr5103 Router re-sold by EE in UK
Firmware download is available for NR5103 @ ZYXEL, please note it´s not for the 5103E-version….
Read all text before you download and change firmware….
SELBERG
5g NR5103 Router - Unlocked branded 5GEE
Hi, I have a NR5103 with is 5GEE branded, but unlocked. I can use with other networks, but would like ot put the firmware to the standard Zyxel.
How can I install the firmware? There is no option in th 5GEE settings to allow me to select a firmware version - it only allows online download of the 5GEE versions
PSA
Re: 5g nr5103 Router re-sold by EE in UK
I had the same issue, but it did allow me ot create a new APN. Although it takes you back to the standard EE one once its been saved, which is confusing. However, it then lets you select the new one and you can make it default.
I would like to install the standard firmware. However, there is no option to do this, is there any guidance on doing this?
PSA