Best Of
Re: pla6457 Software
For reboot the PLA6457 try the "/advanced.html" url after login to the web interface (with the device ip address in front of the slash). There is a possibility for a Hardware Reset.
ludwioli
Re: LTE5388-M804 loses network after some time
Today after 24h of working correctly, Ip changed and "kern.debug udhcpc: Sending discover..." messages started again, with no connection.
sysjohn
Turn off Status LEDs
Dear ladies and gentlemen,
I am planning to buy a managed switch. Is it possible to switch off the LEDs on the GS1200 models? For me this is a required feature since I don't want to be distracted by blinking lights.
Best regards
Tissi
Tissi_2
Re: LTE5388-M804 loses network after some time
@sysjohn Hum, I think this is not the same issue here: in our case most of the time a configuration change can fix the issue, and a full reboot 100% fixes the issue.
Btw, here is the same issue with NR7101 :
I have reproduced the issue this night, and the last messages I got in log was "daemon.info dnsmasq-dhcp: sendLeaseMessageToESMD" about 15 minutes after IPv4 adress has changed. Again, the existing TCP OpenVPN tunnel was still active and running fine, but I wasn't able to ping any other IPv4 address. I will try to reproduce the bug several times this weekd to export log at each point.
Nebula CC Upgrade Notification - 2023-04-17 00:20 ~ 01:27 (UTC+0)
Dear Nebula Users,
The system will temporarily unavailable due to the upgrading.
Reason:
Nebula Control Center will be upgrading to release 17.00.
Started from:
2023-04-17 00:20 AM (UTC+0)
Completed:
2023-04-17 01:00 AM (UTC+0)
2023-04-17 01:13 AM (UTC+0)
2023-04-17 01:27 AM (UTC+0)
Affected scope & Risk:
- All users will be force logout from Nebula Control Center and inaccessible during the progress.
Note: This maintenance event does not affect Nebula devices and their local network services.
If you observed any issues after the maintenance, please contact @Zyxel_CSO
Zyxel Nebula Support
Re: Zyxel LTE5398-M904 connected to the cellular network but no Internet access
Hum, you're right: it's not related with DHCP renewing the IPv4 address and my guess was wrong unfortunatly (I enabled IPv6 and all was working since 3 days, so I was hoping it could be an IPv4 issue and that IPv6 could be a workaround). Alas, I've just had the issue back today (no Internet access and cellular network ok), and changing the band configuration like I do usually to force cellwan to restart was not helping this time (same log cycling and no IP adress assigned).
However, there is something really really strange: I have a tcp VPN established 24/7 to connect 2 networks and albeit internet was down, this tcp VPN connection was still working and I was able to manage a distant server. Next time I'll try to ping a known fixed IP address and to try restart the VPN…
(I have installed the latest firmware published a few days ago, no difference with the previous one)
Re: GS1900-10HP Configuration Failure Reset did not work
Maybe your switch gets an ip from a DHCP server (router?) on your network?
You could try to disconnet all cables except your management PC and reset again; if no dhcp service is available, switch should boot up with default ip 192.168.1.1
Hope this can help
Fred
Fred_77
Re: More colors in log
Mario
Re: 5g nr5103 Router re-sold by EE in UK
Firmware download is available for NR5103 @ ZYXEL, please note it´s not for the 5103E-version….
Read all text before you download and change firmware….
SELBERG
5g NR5103 Router - Unlocked branded 5GEE
Hi, I have a NR5103 with is 5GEE branded, but unlocked. I can use with other networks, but would like ot put the firmware to the standard Zyxel.
How can I install the firmware? There is no option in th 5GEE settings to allow me to select a firmware version - it only allows online download of the 5GEE versions
PSA