-
Why does DX3301-T0 power LED always blink?
Hello, I am trying to help a colleague who got a DX3301-T0 from a seller on eBay to use as an improved home router. It worked when they first received it (a couple of days ago) but now it does not. I do not know what has happened to make it stop working. Powering it on with no other cables connected the power LED blinks…
-
I Need the latest firmware for VMG3625-T50B
I Need the latest firmware for VMG3625-T50B, Serial Number: S210Y46015853
-
VMG1312-B10D Latest Firmware
Hello, I can't access the VMG1312-B10D model V5.13(AAXA.10)C0 firmware version anywhere on Zyxel support website and links on older posts are not working. Can you provide me this version? Thanks.
-
How to MPro Mesh between 2 EX5601-T0
Hello I have an ISP Provided EX5601-TO, and a WX5600-T0 operating as a mesh wifi network. I've purchased a second EX5601-TO (Running the same firmware as the ISP provided version… latest version). I cannot see how to add the second unit to my mesh network Preferrably i'd like to add it as a mesh node (if that's the right…
-
EMG3525-T50B How to allow only certain devices to access the router's web page?
I want to allow only certain devices to access the router's web page, I read the manual about the "Trust Domain", but it only mentions about public IP addresses, I want to allow only my phone and my PC to access the web page, can anyone help?
-
WAN to LAN to connect openWRT router to block telemetry data from smart devices
hi there, I have the the following zyxtel from my provider Odido, in the netherlands: Model Name VMG8825-T50 Firmware Version V5.50(ABPY.1)b24_20240613 i have a WAN port which i would like to convert to a LAN port. is there any way i can do this? I receive internet over dsl, so my wan port is unused. I have gone trough ALL…
-
Source code
I'm requesting source code and toolchain for VMG1312-B30B. The form at is not working.
-
DX3301-T0 and Password Autofill
When I try to access the routers login page using password autofill, the password entered gets replaced by a single character - possibly the last character of the password. If copy and paste the password from my password manager it works fine. I’ve tried on PC with Firefox, Edge and using a third party password manager,…
-
VMG8623-T50B issue after firmware update
I purchased a VMG8623-T50B DSL router about a year ago to replace the limited one supplied by my ISP. It came with firmware V5.50(ABPM.6.0)C0, and has been running fine with no issues. However a couple of weeks ago I updated it to V5.50(ABPM.9.4)C0, and since then I've been experiencing the odd issue where the LEDs turn…
-
V1.00(AAZE.9)C0
I need link for firmware: V1.00(AAZE.9)C0. Best regards
-
Zyxel lte5398-m904 & external antennas
Il router zyxel lte5398-m904 ha due attacchi per antenna esterna, ma servono per potenziare la ricezione 4g o per aumentare la portata del wifi? The zyxel lte5398-m904 router has two external antenna sockets, but are they used to boost 4g reception or to increase the wifi range? Thx Francesco
-
Zyxel EX5401-B1 Configuration with Tensor
Hello all, The company I work for has recently upgraded one of it's sites from copper to fibre, and the ISP has provided a new router for this site in the form of a Zyxel EX5401-B1. Previously all configuration was handled by the companies MSP however since the introduction of this new router, they are stating it's out of…
-
Zyxel EX3501-T0 WiFi 6 DHCP Issue with Superonline (Turkey) - "failed to read /etc/ethers" Error
Hello, I am experiencing a persistent and critical issue with my Zyxel EX3501-T0 modem provided by Superonline (Turkey). The problem is that devices connected via WiFi 6 are frequently unable to receive an IP address via DHCP and are subsequently disconnected. I have already performed a factory reset, but the issue…
-
ARMOR Z2 NBG6817 firmware download
Hello, I'm trying to download the latest firmware of the NBG6817 but : I can't find it on the end of life product download I tried a wget to ftp://ftp2.zyxel.com/ARMOR_Z2_(NBG6817)/firmware/ARMOR%20Z2%20(NBG6817)_V1.00(ABCS.11)C0.zip without sucess and I found it's not allowed since 2021. I tried a wget to…
-
What's the default admin and root password for the Zyxel EX3301-t0?
I recently bought the Zyxel EX3301-t0 as a second-hand router, but it's super locked down. You can't upgrade or do basic stuff. Most importantly, you cannot configure pppoe and make good use of it. It came with a generic username password of "user" "user". In an attempt to unlock the full capabilities of the router, no…
-
Firmware for VMG1312-B10D
Hello, I am using this VDSL router and my new ISP requires me to use a longer PPPoE username which is not supported on my current firmware which is V5.11(AAXA.1)C0. I cannot find any working download links for newer firmware for my model. Please, can someone provide suggestions or links to let me upgrade the firmware and…
-
VMG8825-T50 login credentials not working
Hello Members, My VMG8825-T50 was operational but due to frequent disconnections - ISP asked to reset the device to factory defaults - and I did. Now I am unable to get in the device with a message : "The username or password is not correct or locked." The password on the device label is not working either. How to get…
-
No internet on guest Wifi (EX3301-T0)
I've enabled the Guest Wifi on the router, however clients connecting are not getting an IPV4 address in the LAN range, and have no internet. I've read through the user guide and think it looks ok, but obviously not. The network is set up with two WX3100s in a mesh. The primary wifi works fine, the guest wifi connects, but…
-
Error: kernel: g_pfnAdslGetObjValue port - 0 return value - -4
Hello, My VMG4927-B50A modem log shows non-stop errors, specifically - kernel: g_pfnAdslGetObjValue port - 0 return value - -4 kernel: g_pfnAdslGetObjValue port - 1 return value - -4 Could you help me understand what's causing this issue so I may resolve? Thank you
-
2x NBG7510 as Mesh
Hi there! first i try to give my best english (i'm austrian)! i've got 2 NBG7510 in my house and i would like to connect them for a mesh network, i actually have no clue if it is possible although. latest firmware is installed. As Main router there is a icotera unit. got it from the provider. via lan network "goes" in the…
