-
NAS540: Volume down, repairing failed, how to restore data?
Hi all, I use a NAS540 with latest firmware and 4 x 3TB WD RED disks. A few days ago the NAS told me that the voulme was degraded and disk 2 was taken out. In fact the status of all disks was 'green'. Anyway, I followed the instructions to repair the volume. The time needed was shown as ~35hrs. After around 24hrs I checked…
-
No 'GUI' login fields in NAS326...
Has anyone had such problem...??? My NAS326 browser link: http://192.168.1.175/r51166,/desktop,/login.html I have cleared browsers, tried on different PC's. Results the same. Any solution for that? #NAS_Dec_2019
-
Upgrading From NSA310 (x2) plus NSA365 to a NAS542
Hi All, Apologies for the long question :) I've just discovered that the disk format has been changed between my earlier Zyxel products and the new NAS542. Can anyone come up with a step by step strategy to upgrade, without losing my existing data or having to buy additional disks? I have: * An NSA310 with a WD Red 3TB…
-
Using Zyxel NAS326 without internal HDD
Hi. I'm looking to buy a Zyxel NAS326 for my home, but since I have a few big USB HDDs, I was wondering if I can use the NAS without internal HDD and use only the attached USB HDDs. If I can do it, will I have any limitation? It is possible to make RAID1 using 2 external HDDs? And with 1 internal HDD + 1 external HDD?…
-
NAS320 Update drives from 1Tb to 2TB in Raid 1 configuration
I want to upgrade my Storage in a Raid 1 configuration. Is this the correct procedure 1. Remove 1 drive 2. Insert new 2Tb drive 3. Select Repair option, I assume that this will now be visible in the Volume / Actions column 4. Once repair completed repeat steps 1 - 3 with other drive How then do I use the full 2Tb ? Thanks…
-
NAS326 does not pair to set up the cloud
When I run the procedure in the mycloud.zyxel.com web page, in order to activate a cloud, the device is not found by both the automatic or manual search wit SN and MAC address. A new account has been opened before. #NAS_Aug
-
Zyxel NAS326 Beeping
My NAS 326 is beeping. The firmware is the latest. * I took the hard drives out and put them back in and it still beeps. * I reset the unit but it does not seem like it can be reset. * I took the hard drives out and turned the unit on and it DOES NOT beep. * I tried to recover the data by using the Sabrent docking station…
-
NAS540 hard disk failure reconstruction abnormality
Dear Sir,After I replaced the failed hard disk, the place of resyncing has been stuck at 0.2%. What is the problem? #NAS_Nov_2019
-
Expanding volume after hard disks upgrade
Hello I've recently replaced all 4 disks from 1TB to 4TB and rebuild RAID5 (replacing one disk at the time). It took 5 days to do this and had to do multiple retries to get it done (for some reason it would fail and I had to restart NAS to finish rebuilding RAID5). In the end it worked out fine. Now I'm trying to expand…
-
my nas540 cuts itself
Hello, my nas540 starts, tests the discs, then beeps and cuts - where does the malfunction come from? #NAS_Dec_2019
-
webdav - forbidden
Hello, Using Zyxel 326 V5.21(AAZF.5) webdav enabled. Also port 5002 is open via my router. When I try http://NASIP:5002/webdav/myshareI got error: ForbiddenYou don't have permission to access /webdav/myshare/ on this server. I try with myuser, admin - same message, with root there is no message, user/pass promot repeats.…
-
Zyxel 326 transmission password
Hello Using Zyxel 326 V5.21(AAZF.5) transmission 2.84 installed. How to setup http password require when opening transmission (http://IP_nas:9091) ? Thanks in advance ! #NAS_Dec_2019
-
NAS326 has been "upgrading the Firmware" for 3 days.
I can no longer login via the browser, only via ssh. Currently, I am backing up everything on the NAS.Are there any processes I can kill to stop the upgrade? Anything other than reboot and pray?Are the disks readable by a Linux desktop?Thanks,Harald #NAS_Dec_2019
-
Zyxel326 lost settings after reboot and other
Hello, NAS Zyxel 326, don't know what version of linux is installed: Linux storage 3.10.39 armv7l GNU/Linux I have ssh access and after logon I see this message: BusyBox v1.19.4 built-in shell (ash) First I notice that, when I made some changes - crontab, edit config file, after nas reboots, changes are lost. Is there any…
-
nas326 NFS Ports Forwarding for nat
Hello. Tell me what ports are used nas326 for NFS. I need list ports nfs for forwarding through nat. #NAS_Nov_2019
-
How to use rsync CLI mode NAS326
I wan to use rsync in NAS326. But i don't see how to use it how i do it thanks #NAS_Dec_2019
-
Nas540 cannot manage RAID1 volume
Hi, I have 4x8TB drives working in RAID1, and would like to convert this to RAID5. From the Storage Manager > Internal Storage > Volume, I can select the volume but the button to 'Manage' it remains greyed out. I can only create or delete. Any ideas how I can manage this volume so I can change it to RAID5? Do I need to rip…
-
Need help with Entware; after upgrade to latest package it is broken
Device NAS520. Meta Repository useshttp://zyxel.diskstation.eu/Users/Mijzelf/zypkg-repo/fw5/ Mijzelf I need help with the Entware package. I upgraded from Entware-ng_2016xxxx_arm_005 to Entware-ng_20181002_arm_006 and now it is broken.I updated the package list with opkg update and this updates the package list but in the…
-
[SOLVED] HOW reinstall ffp & metarepsody after change disk?
Hello. I am in possession of NAS326 which I had to replace the disk because it was damaged.I transferred all the data without problems, but I lost the functionality of the ffp and metarepsody (including plex).When I go to the appstore the apps are present and can be installed, but when I try I always get a general…
-
NSA310 Stuck in Reboot Loop
Hello, My NSA310 starts to boot up, takes a long time then all the lights turn red for a short period. I had this happen to me years ago and was able to fix the NSA310 using a set of files called universal_usb_key_func This allowed me to stop the boot process with a USB drive and access the NSA310 via telnet. I had saved…
