-
Seriously, your ideas could be new feature for Security!
Hello Security Forum Members, Do you have moments that if your own thoughts or ideas can make better experience when using Zyxel security products? <3 We can make your wish come true! <3 Simply start a new post here describing your fabulous ideas for features or services you wish to have! Once your ideas get lots of vote ,…
-
[USG FLEX H series] - Rename/Aliases port name
It might be useful to be able to rename a port name. This way, instead of "p1," "p2," etc. I could have "UpLink Router" "Main PC" "Raspberry" "Bedroom TV" etc. In this way, we can identificate directly the correct port connected to it's service
-
Proxy ARP option on USG to work like L3 switch
This was tested on my VPN300 but likely holds true for current models The following setup works on my XS1930-10 XS1930-10 interface IP 192.168.255.233 / 255.255.255.192 Two clients IP 192.168.255.193 subnet 255.255.255.255 gateway 192.168.255.233 IP 192.168.255.194 subnet 255.255.255.255 gateway 192.168.255.233 As the…
-
[USG FLEX H series] Allow Duplicate Hostnames in IP Reservation List for Different MAC Addresses
Currently, the system prevents an entry from being saved if the "Host Name" field is identical to an entry. It shows a "The value in this field is duplicate" error, even when the MAC addresses for the entries are completely different and unique. While the DHCP server assigns IP addresses based on the device's MAC address,…
-
[USG FLEX H series] Display Client Hostname in Logs for Statically Reserved IPs
Currently, when manually reserving IP addresses, the DHCP log records its hostname as (NULL). However, for devices obtaining a dynamic IP from the DHCP pool, the hostname is correctly fetched and displayed in the logs. User @Maverick87 would like to request an enhancement to have consistent and informative DHCP logs for…
-
USG FLEX H BWM support FQDN object
User @PeterUK requires BWM function can support FQDN object for USG FLEX H series model. Anyone who likes this idea, please leave your comments below and vote up for this idea post. original link
-
FLEX H BWM/interface limiting improvement
For the FLEX H to have the same BWM/interface limiting like on older models including interface limiting those per interface in a bridge and BWM interfaces that are in a bridge along with interfaces not in a bridge and the option: Router(config)# bwm control-tcp-ack Thanks
-
Support for Configuring Static ARP Entries on USG FLEX H Series
Currently, the USG FLEX H series does not provide an option to manually configure static ARP entries. User @Ich would like to request support for static ARP configuration in future. This suggestion originated from the post found here: Static ARP Table — Zyxel Community If anyone likes this idea, please show your support by…
-
Support FQDN wildcard for both root domain and subdomains on USG FLEX H
Currently on uOS, the FQDN object only supports the format *.domain.com, which matches subdomains (e.g., www.domain.com, mail.domain.com) but does not include the root domain (domain.com). In ZLD systems, the format *domain.com was supported, allowing both the root domain and subdomains to be covered by a single entry.…
-
Lockout users by username or IP
Hello, after reading another security idea I focused on how locking-out users with too much failed attempts really work. Differently from my idea it does not lock the user while it lock its public IP MY IDEA IS: add the choice in configure —> user group —> setting between locking by username provided and or by IP this IMHO…
-
H series router no hot fields in GUI
User @electsystech hopes the H series can support 'hot fields' in GUI. They don't want to drill down every time to make a selection and we don't want the mouse to be the sole method for object selection. Example
-
2FA authentication by EMail
2FA authentication by EMail on FLEX H models allow 2FA authentication from other IP then the connecting VPN IP is from allow 2FA authentication by WAN
-
Enabling User-Configured Two-Factor Authentication with Google Authenticator
In response to the requirements raised by user @Alex_91, we propose adding a feature that allows end users to set up Google Authenticator themselves. This suggestion originated from the discussion found here: 2FA - two factor authentication | Auto setting Authenticator — Zyxel Community If anyone likes this idea, please…
-
USG FLEX H support more than one SSL VPN configuration
User @ITC_Sercop requires USG FLEX H supports more than one SSL VPN configuration since they need to create two user groups for SSL VPN (OpenVPN Client), one using split tunnel and one using full tunnel, but the GUI doesn't seem to allow it. Anyone also likes this idea, please leave your comment below and give this idea…
-
[USG FLEX/ATP] User account can change its password by themselves
User @kaktusus hopes USG FLEX/ATP user account can change its password by themselves. Anyone who likes this idea, please leave your comment below and give this post a vote. Original post
-
WebGUI view for lockout-users
This discussion was created from comments split from: show lockout-users from GUIDescription: If user entered wrong password many times and lockout by system, there is no WebGUI view for check lockout status. If there is WebUGI, admin could check/unlock user easily Click like if you think the feature is useful and…
-
FWA710 SMS/text message feature
Hello, II would love to see SIM card SMS/text message receiving feature in the mobile outdoor router series. Or SIM card text message readout. And notification via Nebula when received. Reason : From time to time our ISP sends text message for network maintenance work and planned downtime or other important messages from…
-
Configuration of embedded OpenVPN Server
We had the problem that we had to change the entire "OpenVPN Connect" connection configuration on all clients. However, support told us that we could change the server configuration to propagate the settings. But we had no way. I think it would be a good solution if we could change some custom directives, such as…
-
USG FLEX H BWM support QoS setting
User Matthew hopes USG FLEX H BWM can support QoS setting (802.1P Marking). Anyone who likes this idea, please feel free to leave your comment and give it a vote! Original post
-
More improvements to DDNS Backup Address
FLEX H models In some cases ARP to gateway may not fail causing DDNS not to failover to backup so if DDNS tries the Primary Address (plus Checking Public IP URL) and does not reply it should use Backup Address. DDNS uses whats listed in Trunk and does not use the Backup Address causing the IP to not update at DDNS end…
-
BWM supports to reserve bandwidth for SSLVPN
User @laloutrejoyeuse hopes USG FLEX H series can support BWM function that can reserve bandwidth for SSLVPN, like "SSLVPN zone" or SSLVPN object. Any one likes this idea, please leave your comment and give it a vote! Original link