-
USG310 - Throughput?
Hello together, we administrate three Hotels with WLAN for the guests. In all three hotels we have a Vodafone Cable internet connection with more than 200Mbps download. Provided by a Fritz!Box. In all Hotels there is a USG310 directly connectet to the Fritz!Box. Behind the USG310 i only got a throughput of about 70-90 Mbps…
-
ATP 800 ADP white lists
We replace 2 usg1100 to 2 atp800. Config were convert via converter. After that each atp has many ADP alerts on any connections between sites (tcp/udp port scan), some aplications (as exchange DAG group, SIP, AD) stop work propely. Adding them to whitelist don't help. How i can whitelist some addresses wo disable ADP…
-
ATP800 firewall zone rule continue working after delete VTI from zone
ATP800. Default policy deny all traffic. Created rule to allow all from ipsec to ipsec. After delete VTI interface from zone ipsec and added it to new zone, traffic from this interface continue goes to ipsec. Logs show, that traffic goes via rule ipsec to ipsec. src="172.20.67.2:44714" dst="172.20.16.9:135"…
-
IPSec Client GINA Position
Hi, is it possible to change the position of the GINA window in the Windows login of the ZyWALL IPSec VPN client? Unfortunately it covers the Windows 10 buttons for network and you have to move the GINA window.
-
Zyxel USG Flex 100 no connection to wan and lan
Kindly help
-
Vpn IpSec Ike V2 and ISP policies
Hi, I have several customers using the windows ipsec ike2 vpn client to have their employees connect remotely. Lately some users have complained that they are unable to connect due to the policies of the home ISP (In italy Eolo, Wind3, Iliad and i fear many other...) In these cases, when the user tries to log on,…
-
ftp site
Hi, Is there a way to get to the old ftp site? or a way to get info and firmwares for legacy devices? I'm looking for old (zywall usg110 / zywall usg 20W) firmweare files /docs, but I can't find them anywhere on ftp.zyxel.com or ftp2.zyxel.com
-
Routing L2TP for access other tunnels
Hello, I have a USG 110. I have configured a L2TP tunnel over IPSEC. The connection works perfectly for me. I am trying to configure a routing to be able to access the subnets of other tunnels that I have from site to site. But I am not able to reach them. Could someone help me configure the routing to be able to access…
-
Strato Dyndns
Hallo liebe Community, ich versuche seit einigen Tagen einen Strato DYNDNS auf einer ATP 500 einzurichten. Leider kann mir keiner sagen was ich bei DYNDNS Server eintragen soll. Vielleicht kann mir jemand helfen. Mit freundlichen Grüßen Oliver Wend
-
From USG110 to USGFlex200, blocking management from WAN doesn't work anymore
Hi everyone, I recenty changed an old Zywall USG 110 by a new USG Flex200. I couldn't import the same configuration because it's not the same model, so I had to set up the new one manually. It was not really a problem and it was quite quick because I have a simple configuration, but even with the same settings the…
-
USG210 Firewall IPSec VPN Tunnel Site-To-Site Low performance
I've established IPSec VPN Site-To-Site Tunnel between two USG210 Devices. Site to Site VPN, with AH-Tunnel SHA512 on both sides, with AES256 encryption on VPN Gateway for both sides. I'm able to ping hosts on both locations from both locations. The time of response is good, but sometimes request is timed out… :) There's…
-
USG ATP 800 multiple messages "An ip address conflict is detected"
Hello. We replace our Zywall USG 1100 with new ATP800 with latest firmware. We got multiples message "An ip address conflict is detected" after replace in ZW logs for each ip addrees in lan. An ip address conflict is detected. 00:00:00:00:00:00 and aa:bb:cc:dd:ee:ff share the same IP address 172.21.121.100 First mac always…
-
Upgrading USG20-VPN firmware
I have a USG20-VPN with following firmware: I first tried to upgrade directly to 5.35 without success. The firmware file is accepted, and the upgrade seems to be processed. I have no error, but at the end the firmware remains unchanged (even after reboot). Afterwards, I have seen that it is prefereable to upgrade first to…
-
USG Flex 100 Firmware 6.50 ?
Hello, When I log into Flex 100 as Admin, the log file appears a line: AP firmware check successful. Available firmware: V6.50 Patch 1 . What is this V6.50 firmware? The firmware, what I have is 5.35(ABUH.0) Regards K
-
WOW Streaming only with no-udp-disperse
Streaming VOD and Live Streams with WOW are blocky and also dropp packages. Fix: "Router# debug system no-udp-disperse active" Why does this work and what does it change? @Zyxel_Cooldia Kind regards Felix Schneider
-
HOW TO BLOCK VPN APPLICATION THAT ARE NOT LISTED IN APP PATROL?
How to block VPN applications that are not listed in APP PATROL, like SonicWall NetExtender?if I am going to block the IP ADDRESS of the VPN server using REPUTATION FILTER, it is possible that they can't access the restricted list of applications & websites using their VPN server? Thank you so much for the help in advance.
-
lost password
Hi team, l have missed placed the admin password for my USG60 Firewall, is there a way to reset it via the back door, l have the serial to RJ45 cable.
-
Is it possible to resolve names with using IPsec VPN?
Hello, Using IPSec VPN, I can't resolve the names. I can reach the devices with their IP addresses without any problem but the DNS server can't resolve the name. Namely: There is a server inside the network that does DNS + DHCP What I have already done: In the L2TP VPN configuration, the DNS server is the DHCP/DNS server…
-
USGFLEX700 AP licences
Hi, I'm going to replace my USG1100 with the USGFLEX700. I have, in my WLAN, 19 AP and If I'm right the USGFLEX700 come with a bundle of 8 AP licences. Am I wrong if I say that I have to buy 11 AP licences (no NEBULA but on premise management)? What type and product code licences I have to buy?
-
TLS 1.2
Please assist to know How TLS 1.2 is enabled on Zyxel USG 1900?
