-
When ZyXEL will stop publishing updates to USG-60W?
Hi I believe that the 60w is near EoL. But when will be the last firmware released?
-
USG FLEX 200 - Green activity light on the ports
This is very minor and something I can live with but I just find it odd. I just installed a brand new USG Flex 200 and everything is working perfectly. All ports are connected and auto-negotiated to 1 GB/full. However, I noticed that the only light on the port that lights up is the orange connection light. The green…
-
USG 110 - VPN - Geo ip blocking.
Hi,Having a VPN connection using L2TP over IPSec with a pre-shared password. Latest firmware installed. I would very much appreciate if someone could help me with the setup of blocking access to my VPN from all other countries than my home country. Some time ago when I loged into the USG110 I was suggested to use a wizzard…
-
How can I enable the Ping function from WAN port on a USG FLEX 100
I cant find any information about this
-
problems with HApro
Hello everyone, why can't HApro switch when you physically pull out the cable from the active zuvol, but writes this in the logs: Tue Jan 24 08:25:49 2023 Enter Stand_By mode Tue Jan 24 08:26:03 2023 Change to Active mode because timeout. Tue Jan 24 08:26:15 2023 Change to Passive mode because Interface WAN_MAI_GE2…
-
ATP 200 and SFP-10G-C
I know that my ATP 200 per the documentation support - SFP-1000T. However the devices also supports 10G in both single and multi-mode but how about "10/100/1000/10,000BASE-T Copper Ethernet SFP+" Regards,
-
VPN IPSEC IKEv2 and ANDROID13
Hi, I'm trying to connect a smartphone under Android 13 and my USG110 with an IKEv2 connection. My USG110 is behind an other product (not direct on internet). I don't understand why I have : Phase 2 Local policy mismatch I have followed :…
-
DNS
Hi everyone, I can't get my.name.it to point to the internal network address 192.168.x.x. I compiled the dns but it doesn't work. from outside the network instead typing my.name.it the correct client replies and everything works correctly. Can someone please help me to solve the problem. thank you very much
-
ATP100: Policy Control Center "skips" rules?
Hi, I'm trying to configure a simple rule for incoming Remote Desktop Connection.I've first configured Policy Control Center and then the Nat with a Virtual Server. The problem is that when i try the connection the FW reject it saying "Match default rule, DROP". it seems that the rule saved is "skipped" by the firewall.…
-
SSL VPN
Hello, so my first visit here. I have a question about SSL VPN. A customer from me, needs to access an internal website from everywhere. (mobile devices etc etc.) We always use Secuextender, but this is not available for mobile devices. So i have read the manual, and i see it's also posible to create an ssl connection, by…
-
making the router aware of users (AD)
Afternoon anyway i can get the zywall aware of users so we can do user based rules with out having them to log into the router? ie can i point to LDAP some way or have a agent like sophos >https://docs.sophos.com/nsg/sophos-firewall/18.5/Help/en-us/webhelp/onlinehelp/AdministratorHelp/Authentication/STAS/index.html thanks
-
USG FLEX 200 no proposal error with Strongswan
Hi, i've made setting on VPN Gateway PHASE 1 as it was wrote in "USG/VPN/ATP Series - How to establish client to site VPN with Linux StrongSwan " and have settings in ipsec. like "ike=aes256-sha2_256-modp1024! esp=aes256-sha2_256!" but have no proposal error/ how can i solve it?
-
USG 20 multiple VLANs, same subnet
I'd prefer my internal network being in same subnet (for broadcast messages), but internal traffic enforced by VLANs instead of hosts. The following illustration is a simplified setup of the scenario:VLAN1 allows NAS 1 and NAS 2 to communicate with each other directly.VLAN2 does the same for PC and NAS 1.VLAN3 would…
-
Site to Site VPN Communication Issue - USG60 to Azure VNet
Good afternoon, We have a new Azure virtual environment set up, using two subnets, 10.2.0.0/24 and 10.1.0.0/24. The former is used by the Virtual Gateway, and the latter is the main subnet used by our two Virtual Machines. We have set up a site-to-site VPN between the Azure virtual environment and our Zyxel USG60 firewall.…
-
any way to sync blocked IP's with external sources? (USG range)
Hi, just wondering if there is any way i can sync with external block lists?I notice "Enable URL Blocking For External DB" in URL filter IE - If i block a IP on one device (or service) can it populate to others, from external lists such as https://security.microsoft.com/tenantAllowBlockList Thanks in advance
-
DHCP? problems on USG110
Hi together, I've been having a problem with DHCP (or I think it's DHCP) for a few weeks now. After several attempts, I set up the USG after a factory reset.The problem persists and I cannot isolate it. I have installed the latest version 4.73 ZLD.The problem: I have devices here, including two company laptops that I use…
-
MFA with AD authentication?
I am using a USG Flex500. Users login to SSL VPN with their AD credentials (setup via Auth. Method/AAA Server in object). However if I try to setup MFA for this users group, I don't get the "set up google authenticator screen" option. It seems this setup is only shown for local users. You can try this yourselves with the…
-
USG110 IpSec VPN Issues
Hello, I have a strange issue on a site-to-site VPN scenario, using 2 USG-110. The issue is that, normally once a week or more, the bandwidht goes incredibly down on the tunnel, and only if I reboot twice (because the firt reboot don't work) both the USGs, I can solve the issue. Can anyone help me understand what can cause…
-
Dovrei configurare un USG Flex 100 su connessione pppoe
Dovrei configurare un USG Flex 100 su connessione pppoe ho le seguenti informazioni: Username: 42995@s-tracert.it psw: xxxxxxxxxx VLAN: 835 Ho anche seguito questa vs guida (https://support.zyxel.eu/hc/it/articles/360001390334-Configurazione-di-una-VLAN-su-un-interfaccia-WAN-PPPoE) ma non riesco a connettere il firewall
-
PIXELATED IMAGES IN AUTOCAD GEOMAP LOCATION
Every time when they open the GEO LOCATION MAP in the AUTOCAD application and search for the address of the map, the images are pixelated and it takes a longer time to load fully load it. How i can UNBLOCK or EXCLUDE it in the URL THREAT FILTER and make it ACCESS FORWARD? Anyway, the model of firewall that I used is ZYXEL…
