-
Accessing LAN1 from IPSec_VPN
Have a remote location (USG20W-VPN) connecting to a central location (SonicWall Tz500) via IPSec VPN. The IPsec tunnel shows as up on both ends, and the remote network can access devices on the central network; however, the central network can't access devices on the remote network. I have several other remotes with a…
-
[Recntly] Cannot find SecuManager
Hi, i am getting the following error in logs since this morning : error myZyXEL.com Get CNM-ID fail, with error=1,msg=Cannot find SecuManager Best regards
-
SP300E
Hi. I have come in possession of a SP300E printer, without power source. Before I am going to buy a 5V 2,5A adaper, I am going to ask: Is this printer usable without specific drivers or servers? I am willing to connect it to a router. Will it work as a generic (albeit limited in size) printer or is it "invisibile" but for…
-
How to see LAN infront USG20-VPN
Hello,This can be a weird question and configuration, but we have a USG20-VPN connected to a LAN in its wan port. There is some machines that cannot be moved behind the firewall. Is there any way to reach the lan (just needed to one machine, even to one port for MS SQL Server could be enough) infront of the USG from…
-
USG Flex 200 - L2tp over IPsec with Active Directory group
Hello there My USG Flex 200, is running Firmware 5.31 Today I have created from the wizard my L2TP settings with IPsec. VPN Gateway & VPN Connection works fine, when change the L2TP settings to 'local' However, change to AD Its not working. My test from 'AAA server' Works fine And my user/group - When user is not in the…
-
IS USG60 EOL?
Is the USG60 still supported?And when will support end?Where do I find this information? Thanks in advance
-
Flex 200 Dual WAN Configuration
Hello All, I have a fleet of USG Flex 200 routers deployed. WAN 1 is static IP from ISP, WAN 2 is private IP (no internet access) from cellular modem. Goal here is traffic from LAN is IPSEC through WAN 1 when possible to private network. If WAN 1 were to ever fail, Zyxel should fail over to WAN 2 and my LAN address should…
-
Zywall VPN 50 - Video Tutorials
Hello, Where can I find video tutorials about setting up a Zywall VPN 50 on Nebula? Thanks, Alex
-
USG 200 lan1 and lan2 communication
Hello everyone, on a USG 200 i've created 2 lan on 2 different ports, P1: 192.168.2.0/24 P2: 10.0.0.0/24 Now, I need them to communicate, for a collaboration between the two offices. I've added in security policies two active rules: Lan1 --> Lan2 any - any - any - any - allow Lan2 --> Lan1 any - any - any - any - allow.…
-
Upgrading an USG110 to USG700Flex - some questions
Since our USG110, especially the support for it, is soonly running out of service, we're considering to purchase an USG700Flex as replacement to avoid a complete new OS we have to familiarize ourselves with. In this connection a few questions occur: 1.In Europe following devices are available for…
-
USG 60 NAT problems on port 5060 udp (sip)
Good morning,
I cannot correctly configure nat on USG 60 on port 5060 udp. Specifically I need to configure the nat from Wan1 (public ip) port 5060 upd to lan 192.168.1.201 port 5060 udp. Other nat configurations (smtp or pop3) work fine. The SIP ALG service (port 5060 udp) of the USG60 is disabled. Waiting for your reply…
-
Content filter : image broken while accessing http websites
Hello, Trying to enable web content filter on 2 ATP800 (HA) v5.30. Everything works fine if I try to access a blocked website by https : but when I access by http the image is broken : Why image url use domain of website I'm visiting in https and firewall local lan interface in http ? Any help would be welcome ! Thank you
-
Can I pass Geo IP countries into remote server syslogs?
We have Geo IP set up on our ATP200. On our View Log tab, we can see a country flag next to every source and destination IP address. In our remote log settings, we have all log categories enabled, but no country information is passed through the syslog to our remote server. How can we pass the country name through to our…
-
IPsec VPN USG Flex 200 error
hello,I am trying to set up a point to point ipsec vpn on a USG Flex 200, my side is the client.I have used the wizard and it has created the gateway and the connection but I can't get it to connect.In the log I see the error Phase 2 proposal mismatch and No proposal chosen. I have checked within the parameters of the VPN…
-
where can i find old firmware downloads for some old Zyxel Switches
I am clearing out a load of old network switches and zyxel kit, I don't just want to bin kit - (not very green) and these are perfectly good old switches, but before I give them away or sell, i'd like to upgrade to latest firmwares available. Problem is the good old ftp.zyxel site has gone now, and new site doesn't even…
-
QOS for Clients
Hello, I have several computers at home that have a USG Flex. 100 run. If a PC now makes a download, it takes up the entire bandwidth. How can you set it up so that you can prioritize PCs. Is this under BMW? greetingMarcus
-
No traffic with VPN site-to-site with 2 USG behind router
Good morning, i have 2 firewalls (USG40 + ATP100) and i created a site to site IPSEC VPN. The vpn connects correctly, but I cannot pass traffic from one side to the other.Both firewalls are behind routers.I followed this guide using the steps related to the configuration behind the router:…
-
Delete secu manager cert
There is a default CA certificate that is installed and trusted on my VPN100, can I delete this? I have no intention of using the SecuManager service and have read that is has many security vulnerabilities, I would prefer not to trust their cert if I don't have to. Can I delete this without losing other funcionality? Thanks
-
Connect clients on LAN 1 to server on LAN 2
Apologies if this is trivial but I could not find an answer via Google and I am not a trained network engineer. Based on the network diagram below, how-if possible-should I configure the USG40? Thank you.
-
Migration Zywall USG 1000 to USG 1100
Hello, we are using an old Zywall USG 1000 and bought a USG 1100. The online converter does not support Zywall USG 1000 => USG 1100. Is there a way or workaround on how to migrate or convert the configuration? Thank you!