-
How to reach an external server on a USG1100 firewall
Hi, I need to reach an external server (IP 20.103.254.144) through the ports 80 and 443 of a USG1100 firewall from the clients of my LAN. At the moment the firewall blocks the outgoing flow. I found lot of guides about NAT service for incoming packets to an internal server but nothing about the opposite. I have to go out…
-
USG FLEX 100W Easy Log Question
For some reason my log used to show hits from IP address and to what IP they are trying to gain access but now it doesn't. I'm sure there is an easy answer I just haven't found it yet.BTW....the email logs DO display the IP addresses. Thanks in advance for any suggestions!!
-
Wireless functionality showing on non-wireless USG Flex 200
Hi, I recently upgraded from a long running USG Flex 50 to a 200. The upgrade went well (it was mostly done manually) but an interesting thing is that I see all the functionality in the UI that would be there if my model had built-in wireless. It does not. If it's not going to pose a problem down the road, I suppose I can…
-
IP Reputation - Whitelisting Best Case?
Hello. This morning a user emailed me a bounce-back from one of his contacts. It indicated that the external email couldn't be sent to our user. I looked in the logs and found that the IP was blocked because it was in the "IP Reputation - Phishing" database and marked as High. What is the best way to go about unblocking…
-
atp100 - veeeery slow speeds
We have a 65/65 ethernet connection that works at full capacity on a cheap €50 router. But when I connect it to the ATP100 I barely get 25/15 and the usual speed is only 6/15. I guessed that the network speed wouldn't be an issue since it's much less than 1000Mb, but I was wrong. Is there any policy that can create this…
-
ZyWall 5 latest firmware released needed
For a temporary setup I would like to use a ZyWall 5, but I would like to bring it to the latest released firmware before using it. According to my research this should be "ZyWALL 5 UTM_4.04(XD.9)C0". However all links to this file seem to have disappeared. Could somebody share this file?
-
Desktop remoto da Android
Buongiorno, ho un USG FLEX 50 (USG20-VPN) e ho chiuso una VPN con il cellulare Android ver. 11 [_GG-Mulino23:43:41 / 23:43:41 unlimitedMode-Config5.90.228.121/192.168.4.85 -user(_GG-Mulino)2022/10/20-N/A ] ora, utilizzando l'app "Desktop remoto Microsoft" sul mio cellulare non riesco a connettermi al Desktop del PC in…
-
[eITS#200700296, 220700648] When DNS TTL of FQDN object for destination IP timeout, the video stream
So have not tested the
policy control for this fix if it fixes it because I need that for
USG60 but what I have tested is BWM on the VPN 300 with the new
firmware V5.32 and it buffers when TTL goes to 0 and then is removed
the for like *ttvnw.net for Twitch video like: https://www.twitch.tv/twit It is then set for BWM
to…
-
USG20-VPN Add another LAN to router on second lan port
I have two separate LANs locally. Each is fully functional by themselves for lan and wan access. Rather than create a slower site-to-site VPN between them, I would like to add the second lan to this router for full two-way communication. So, Wan port on USG20-VPN is up. Lan1 is on X.X.13.4/24 on port P3 on to the switch…
-
USG1000 Firmware download
hi all, may i know where can i find USG1000 firmware ? i cannot find the download in myzyxel.com pls help Best regards Joe
-
Renew Your License to Keep Your Security Gear Going
Keep Your Security Gear Going Imagine this situation with your car. If the motor oil for your vehicle goes unchanged for too long, it loses its effectiveness and can no longer adequately protect your engine. Just like the USG FLEX to the extent that if the UTM license is not renewed, the firewall cannot safeguard your…
-
Do you know? Pay less and secure more from USG FLEX with UTM license bundle
Are Your VPN/USG Firewalls Getting Old? Get
USG FLEX with UTM Bundle: Pay Less Secure More! Look at how the cyber Attacks are mounting every day. Are your existing firewalls equipped with reliable security to face it head to head? Why risking it all when you can simply get an UTM-bundled USG FLEX to leverage Zyxel Security…
-
USG60W slow wifi
I'm using a USG60W with a 400M connection from my ISP. With wired connections, I get just over 400, but my wifi speed is about a tenth of that. No VPN in use. Things I have tried to resolve the issue:1) verify AP not listed as "limited AP"2) turn off Anomaly Detection and Protection 3) turn on Bandwidth Management (no…
-
Question about a security log entry
What is going on here?btw, I have a GEO fencing rule WAN to Zywall for Asia.But doesn't seem that rule triggered. 39 2022-10-17 13:27:01 alert User Failed login attempt to Device from ssh (incorrect password or inexistent username) [count=4] [my public IP] Account: root 40 2022-10-17 13:27:01 alert User Fail login attempt…
-
Problem with VoIP in WAN1
Hello,I have 2 subnets.The first one is for PCs and wifi, the second one for phones in VoIP.The problem is that my TLC operator needs 2 different eth ports to manage data and VoIP.There is no way to merge both data and VoIP in the same port of the router of the TLC. I have a USG Flex 100 deployed, so WAN1 is the uplink for…
-
Routing problem ikeV1/ipsec VPN
Hi everyone I'm trying to setup a remote client vpn between my pc and an USG FLEX 50. I've already configured similar connections in the past and I hadn't any trouble, but, this time, I can't make it work. Basically, the vpn is configured on the usg via configuration wizard, then i export the config to a zyxel vpn client…
-
SSL Vpn client Win vs. Mac
Hi everyone, I have a problem with a Mac SSL client on a ATP200 (latest Lab fw released in may): a home worker bought a new Mac AIO, installed the SSL client (latest version) and copied the configuration from the old Win client. There is no way to be authenticated. Win client works fine. Have i missed something? Just for…
-
Pros/cons in blocking GEO locations from inbound - other use of GEO fencing?
What is the advantage to further protect though incoming traffic from GEO locations?Should I also block outbound?
-
USG40: strange DHCP Behavior
I've setup a USG40 with 3 network segments: Lan1 (192.168.20.0/24), Lan2 (172.31.2.0/23), OPT as WAN with a fixed IP address matching network segment for WAN connection (subnet 192.168.1.0/24). DHCP was enabled on LAN2. Starting address 172.31.2.51, 400 clients available, so addresses should start from 172.31.2.51 to…
-
USG Flex 700 & GS1920-24HPv2 Throughput Issues
Hello all, I currently have a USG Flex 700 connected to a GS1920-24HPv2 with a 4 Port LAG. I currently have 5 vlans (1, 10,20,40,50) using the lag0 port on the USG and the T1 LAG on the switch. I have normal IP Addressing using 192.168.xx.1/24 on the USG and 192.168.xx.2/24 on the GS1920. My issue is with a loss of…