-
I want to know the sistem password for Zyxel router P_660W-Tx series
-
5Ghz Antenna Dropped (VMG3625-T50C)
Hey everyone, my modem (VMG3625-T50) was working fine until the 5Ghz Wi-Fi dropped on all devices. 2.4Ghz is working fine. In the config I can see 5Ghz is also on, but none of my devices found the SSID. I didn't change anything on the config. Restarting & turning off didn't help. Do you have any suggestions to solve this…
-
PLA6456 - Connected but no traffic flowing
I have two PLA6456 Adapters - one in an office in the basement (local) and one on the 2nd Floor with a NWA110AX connected to it (remote). On 5/16 traffic stopped flowing between the two PLA6456 Adapters. I rebooted the local PLA6456 from its web interface and traffic started flowing again. I upgraded the firmware on both…
-
PLA6456 keeps dropping internet connection
Been using PLA6456 adapters for about two weeks. They frequently drop internet connection while in use for no reason. I've upgraded firmware, set up a 1-second ping to try to keep connection open, and disabled power saving. Still keeps dropping, already twice today. Unplugging and re-plugging resumes the connection but is…
-
Zyxel vmg8825-t50 WiFi connection issue
I changed internet provider and the new provider gave me this new router. After installation all my family 4 android smartphones can connect to WiFi smoothly. Instead an Nvidia Shield k1 android tablet refuses to connect. Connection status become "Disabled" or "Saved". I have tried: 1) reboot (both rooter and tablet), 2)…
-
IPTV Channel Freeze after some time
Hello, I have a VMG3625-T50B, I have configured VDLS2 using PPPOE and IPTV interfaces. IGMP Proxy is enable on the IPTV interfaces. I have my IP addresses for both VDLS and IPTV interfaces. Everything just seems fine. But when I start watching IPTV, channel freezes after 3-5 minutes. When I change the channel, IPTV works…
-
AX7501-B0 Alternative WAN port ETH
Hi! Can you choose another WAN port instead of the SFP 10GB port. I have looked at the manual and also looked around in the WebGui, but just got more confused. I can't seem to choose the correct wan interface. See example below. Thanks in advance
-
WRE2206
Hi, is it possible to connect this reapter via ethernet cable to router and then by wifi to PC? Ive got very weak signal from Zyxel router, bought this reapter to connect via ethernet from wall and spread wifi signal, but it seems it does not support such connections. Ive tried to reapter by wifi signal froum router (2 LED…
-
I'm looking to get 10Gbps broadband. Which zyxel product?
So a new Central London based isp, sold me 10gbps broadband. I'm looking forwards to unleashing that (or close to that speed). Their installation process has an nte on the wall, that I can connect to my zyxel nr7101. I understand when I do that, I'll get 2.34dl and 1.2 up. My question, is there a zyxel device, that'll…
-
VMG3925-B10B Router password not working after reset
I have tried to log on to my VMG3925-B10B router with admin/1234, admin/admin and admin/password but these are not being accepted. I have tried resetting but no luck. Can you help? #SP_May_2019
-
VMG3925-B10C vs Google Nest Mini
I have a VMG3925-B10C router and have recently got a Google Nest Mini - I have seen a few threads about this but despite trying to work through some of the fixes I am really struggling - the Nest works fine on a hotspot and been told by Google/my internet provider it’s the router - can anybody help me? I am not the most…
-
Unable to log into VMG3925-B10C
Admin: admin Password: using combinations of 1234, admin and blank All do not let me log in? Username and passwords are invalid. I've reset the router a few times now to no avail. I may have changed the admin and password in the past, and of course I don't remember them. However I believe reseting the router does indeed…
-
Disable WPS on VMG8825-B50B
Hi, I would disebale the SSID visibility, but to do this on VMG8825-B50B, I have to disable the WPS first. From the WPS menu I cannot disable the the WPS with the dedicated radio button, it is not configurable. Anynone know this issue? I have to do other configuration first? thanks in advance #CPE_Oct_2018
-
NWD7605 - download speed drastically low compared to upload and drops
Hi All, I just recently bought a NWD7605 Wifi 6 ready dongle to take advantage of my 2.5gbps FTTH connection. I installed the latest driver (dec 20th 2022) but I can't achieve good download speeds on any speedtest: I only get a 60-80mbps DL (500mbps UL) average with the Wifi dongle. I'm only 4 meters away from the router,…
-
wap3205 time sync
Hi i have 3 wap3205 in my House they are working as access points correclty. But it's not possible to use ntp server for the system time. when i set in the webinterface the time and a power fail occours the system time is reseted. So it's the time programming for wlan is not usable after a powerfail. configurating a…
-
VMG8825-T50 V5.50(ABOM.8.2)C0 : How to schedule wifi ?
I updated my firmware to the latest version (V5.50(ABOM.8.2)C0). But since then, I cannot find the wifi scheduler entry (Berfore : Network/Wireless/Wifi Scheduler). I did create a new rule (Security/Scheduler/Add a new rule). But I cannot find the way to enforce it (Wifi on/off). Any idea ?
-
VMG3312-T20A: Cannot upgrade firmware
Hello, I had the VMG3312-T20A with the original firmware from T-Mobile. I encountered some issues, so I downloaded the latest firmware available on the Zyxel site and upgraded the modem to V5.30(ABFX.5)C0. The upgrade went smoothly, and everything is functioning properly. However, my service provider increased the…
-
VMG8924-B10D, scp/sftp failure: corrupted IPv4 header if any ethernet device plugged
Here is a problem I described in Ubuntu forum ( https://ubuntuforums.org/showthread.php?t=2489877 ), and also reported by another OVH ISP customer (https://community.ovh.com/t/transfert-ssh-reseau-local-zyxel-vmg8924-b10d/38845/4): When I try to transfer non-tiny files between two machines on my LAN, using scp or sftp,…
-
SBG3300-N000 Lastest Firmware Version
Hi, please confirm the latest firmware version for this router. The Zyxel website doesn't seem to give advice. The two versions I've seen are V1.01(AADY.9)C0 and V1.01(AAZZ.1)C0? Which of these should I be using and is there a later version? Thank you,
-
Help with connectivity PLA4231 security key
Hi everyone. I can't seem to find a discussion relating to my issue. I am trying to connect my devices to the wireless extender PLA4231. I seem to be able to get the extenders to communicate but on my device it asks me for a security key which never seems to be correct. I have tried restarting the extenders to their…
