-
ARP isolation option in VLAN port settings
This stops ARP for
going to other ports that are checked but allows broadcast traffic
like NetBIOS between ports for use with proxy ARP and IP Source Guard
ARP Inspection
-
Radius Authentication Calling-Station-ID attributes
Hi, I purchased five Zyxel 1920-24HP switches to us with my other switches. For a long time we are using MAC Authentication to RADİUS. I want to install and setup Zyxel 1920-24HP to use MAC authentication but I got " RADIUS authentication request does not contain check attribute 'Calling-Station-Id' " error. How can I…
-
XGS1210-12 - Ability to change management Vlan
Please provide the ability to change management vlan! We do not use VLAN 1! This is so simple... Thank you!
-
VLAN Mapping N:1
Hi Guys, I'm having a situation where I need to map many VLANs to one VLAN.I've tried to configure this on a GS2220 and a XGS1930 but as I can see the switches only support 1:1 VLAN mapping. When I configured to translate VLAN 1001 to 103 on port 10 and I want to add another Mapping VLAN 1002 to 103 on port 10 I get the…
-
GS1920-24 - Encrypt switch-password in config backup file
The configuration-backupfile of a GS1920-24 with 4.50 (AAOB.2) installed, contains the switch-password in clear text. Please encrypt the password.
-
Easier VLAN overview for VLAN status/ detail (GS1920)
When checking the vlan allocation I need to click on each VLAN separately to see the allocation of that VLAN to ports. It would be nice to have an "all VLAN" option there that shows the details for all defined VLANs (split into pages as necessary), so showing a list of all vlans and their port allocation It would also be…
-
Why can't I confirm combined ports LAG speeds on XG1250-12 switch?
I'm trying to connect on LAG from my 1250 to a older netgear GS116e v2 managed 1Gigabit switch which has static LAG link aggregation only, like this: Asus RT-AX58U Router--------------Netgear GS116Ev2========Zyxel XG1250-12 However when I attach the 1250 having created LAG Group 2 via 2 cat 6 patch cables, BEFORE…
-
How to configure port failure redundancy in Zyxel GS2210 24 Port Switch?
Hi , Kindly tell what will be the configuration of the switch? If I want to make any FE port as a backup of F/O port. For example: The assigned FE port will remain down until the F/O port is connected or UP. In case if the F/O port is down or disconnected then the assigned FE port turn on automatically. And when F/O will…
-
Change Send the packet to the mirror port
Currently Send the
packet to the mirror port only sends to the set mirroring monitor
port but whats needed is to set the port in parameters for a policy. So the mirror port this
traffic goes to is usable as well as the traffic being mirrored is
too usable.
-
IGMP multicast VLAN more than 15 VLANS
When enabling IGMP feature for multicast traffic you can define up to max 15 VLANS. For larger environments this is way to low. HP, CISCO,... provides more VLANS. Please expand this maximum!!
-
Import own certificate in Zyxel switch
This post is for the discussion Own certificate on GS1920 or GS1900-10HP. This feature is now in Zyxel future route map and will be added in Zyxel switch except GS1900 because it is an entry level managed switch.
-
"show mac address-table port" unable to query trunks, confuses interfaces and trunks
Hi guys, I observed a problem with both the command line parser and the output of "show mac address-table port". The switch model is XGS2210-28 on FW 4.50. On the switch, two trunks are configured: --- trunk T1 trunk T2 trunk T1 interface 25 trunk T1 interface 26 trunk T2 interface 27 trunk T2 interface 28 --- But I can…
-
IP Source Guard Static Binding Many IP to one MAC
Currently with IP Source Guard Static Binding you can only add one IP to one MAC but what if you have many IP's to one MAC.
-
10Gbase-t/Nbase-t SFP+
Hello, I'd like to add some high speed copper ports to my XGS1930-28 but right now zyxel sells only 1gbase-t or optical 1/10g. There are now plenty of low power 10gbase-t SFP+ OEM choices from marvell(Alaska series) or aquantia(AQS series). If SFP+ power budget is an issue both makes 5gbase-t variants(Marvell Alaska…
-
Too short column widths in web interface
Hi there, There is a general disadvantage in switches web interface, which can be improved very easily - too short column widths in Port Status table. Change the width of "Name" column from "50" to ... at least "200"! Most of people now do have wide screens on their computers/laptops/etc, so it is more comfortable to have…
-
Quick Ping for Switch
To test link reliability, we need quick ping on the switch. Here is example from other vendor: SW01-CORE-L3-0205-F3> ping 192.168.12.21 source 192.168.12.19 rapid count 1000 size 1500 PING 192.168.12.21 (192.168.12.21): 1500 data…
-
VLAN range configuration for CLI
I have been using the 3700 series for a while now. I noticed that you can configure multiple port settings using "interface port-channel x-y". I tried the same strategy with VLANs but it doesn't seem to work. ====================================================== GS3700(config)# vlan 5-20 vlan *5-20 % Invalid input…
