-
Change logging intervals w/o rebooting?
Settings I want to change: / logging send device-information "interval" "3600" / logging send system-status "interval" "60" / logging send interface-statistics "interval" "60" Is this possible without uploading a .conf and rebooting? @Zyxel: this should REALLY be in the web options! Also for older models! You have a…
-
site-to-site VPN works, but no ping/traffic
Trying to migrate the pinned up VPN connections from my F50 to the F200H. Remote is a F200. Set up the connection with the same parameters, worked on the first try. Connection is steady – but no traffic is possible. IKEv2 PSK Phase 1 DES/MD5 AES128/SHA1 3DES/SHA1 DH2 Phase 2 AES128/SHA1 3DES/SHA1 DES/SHA1 DH2 local is…
-
DHCP conflict
Creating a DHCP server with the same subnet disables an existing DHCP service on another interface. WITHOUT WARNING! This is terrible! Even the oldest Zyxel devices I have seen check against a list of conflicting subnets. Please fix this!
-
USGFLEX500 slows down FTP downloading in loadsharing mode
I configured USGFLEX500 with load sharing (WAN1 and WAn2_ppp) for two providers. I defined a trunk selected weighted round robin. With download and normal surfing load sharing between two providers works fine. Also downloading a file of 2.4GB with FTP works fine. But uploading the same file with activated load sharing…
-
USG FLEX 200 Captive Portal Configuration
Hello dear all I need help zyxel USG FLEX 200 captive portal I use it as a controller
-
USG FLEX 200H VLAN where? web interface toddler version?
Configure VLANs, where is it? I'm learning this device is not as great as my Flex 200 (non-H) Why is the web interface designed for a toddler on a tablet? If zyxel is taking notes from the Windows 10/11 GUI playbook where they think everyone is using a table, that's dumb! The older web interface is much better, and scales…
-
Does the Flex-H not support LLDP?
It doesn't show up on any of my neighboring devices, so I guess "not yet"?
-
USG FLEX 100
Hola amigos, me gustaria saber si hay algunas certificaciones o cursos en Español para poder gestionar correctamente mi Usg Flex 100 desde cero. Soy de Panamá, saludos cordiales.
-
SSL VPN disconnection problems on windows 11 client
Hi, We are facing a connectivity issue on a win 11 laptop (ASUSPRO P3540FA) The connection works fine on Ethernet, but drops over Wifi after few seconds. We have ZyWall SecuExtender 4.0.4.0 client installed. Here are some things we tried in order to fix the issue: Reinstalled the VPN. Updated Windows11, BIOS and Wireless…
-
need some assistance regarding with my USG60
I just want to setup a SFTP setup here at my office request by the client, i need some help how to comply this
-
USG FLEX 500H - web access does not work correctly
hi, I cannot access my firewall via the web interface. I can log in but then I have hourglasses running in all my dashboard windows. I restart the firewall from nebula and then everything works again. unfortunately after a few days the problem recurred. This doesn't seem to affect its operation. Internet access works. I…
-
Serial comunication not clear on USG FLEX 500 H
I have encountered a peculiar behavior during serial connections with the USG FLEX 500 H. Specifically. I need to press the 'Enter' key multiple times to fully display all the expected output on the terminal.
-
Where is SNAT?
Our US suppliers are showing that the only available units are this new H series. We purchased one thinking it was simply "hardware only" because otherwise everything is bundled with licenses. What we found is this new cut down interface with critical features missing. Calling in to the support line was even less helpful -…
-
Serial comunication not clear on USG FLEX 500 H
I have encountered a peculiar behavior during serial connections with the USG FLEX 500 H. Specifically. I need to press the 'Enter' key multiple times to fully display all the expected output on the terminal.
-
Admin Service Control
Hi, is the "Admin Service Control" - Setting not an option anymore? We configured all our zywalls to only allow Adminlogin from a specific port an/or IP. Closing the Port is not an option for us because users authenticate through this on the wan-side. The only thing i can do now is to use 2FA for the Adminlogon and hope…
-
Flex H CLI
Hi, i tried to unlock a lockedout user with ssh but the CLI has changed so much from the regulard Flex-Boxes that i couldn't find the any working commands and i dind't find any reference guide. Is this in the making?
-
IPv4 to IPv6 NAT
I am installing a USG 100 firewall and I want to configure an IPv4 address on the WAN interface and an IPv6 address on the LAN interface. Does Zyxel support IPv4 to IPv6 Network Address Translation?
-
USG FLEX 200H where is the BWM and/or QOS settings?
I can't find it anywhere. I've read the manual and searched the internet. It seems like it should be under Network > Routing but when I try to add a Configuration there, there are no options for BWM or QOS.
-
FLEX H Series
I read that the Flex H Series has been created on a new platform vs the previous Flex devices…and that some of the configuration on the first generation Flex devices isn't available "yet" on the Flex H Series. Can someone comment on that? Are the Flex H series capable of standalone? I'm tempted by the performance of the…
-
USG FLEX H – GUI is cumbersome to use
The new GUI, as it is currently presented, is a total step backwards. Do we really have to select every rule to be changed via the checkbox before we can edit it? The previous drop-down menus were never particularly sophisticated, but compared to the cumbersome editing functions in the FLEX H series, I already sorely miss…