Ansa  Freshman Member

The manual I posted is the OBM version. For the version provided to WIND Italia could be found at below link which it's correct one. It seems WIND Italia had different password for admin account. https://www.infostrada.it/fileadmin/Materiale/guidemodem/Manuale_ZYXEL_VMG8823.pdf

Just tried it like Rory mentioned to enable the SMB1.0. Then it need to put the path into the folder column like: \\192.168.1.1\usb1_sda1 (My LAN port IP address is 192.168.1.1) Afterward, my windows 10 can map it and shown as below

Please try use the default password (admin) or you should be able to find the password on the back label at the device

Can you share both full file name of the firmware version? If you saw "illegal Image", you might use different firmware version. For example, the firmware I can see on ZyXEL website is 5.13(AAXA.7)C0. Maybe you had different one?

I used a use stick to set up as below steps. 1. my USB stick shown on the web GUI 2. Create a new share by click "Add New Share" button and put below information in my case 3. I select . for my usb stick since there is no folder in it. 4. This is how it looks after apply the settings. 5. Afterward, just use \\192.168.1.1…

You can find below link that it shown how do disable Q1000Z wifi radio http://internethelp.centurylink.com/internethelp/modem-q1000z-wireless-radio.html

Hello, Can you share that your are using wireless client to do the speed test or wired client to do the test?

Samsung Galaxy S7 should support 802.11g. Are you able to find the SSID of your P-660HT on the smartphone?

Hi. It looks like the router blocked these traffic, based on current information, there is no clear clue shown your router has been hacked. However, it would be highly recommend that you could check if there is any unusual settings in your router and also change the password for it.

Hi Juergen, I saw the valid date for this forum is 2018/01/31 to 2020/02//07. can you share what is the valid date you saw?

Hi Seascapes, you would be able to update the firmware after you login the web gui and find the firmware upgrade page: Maintenance -> firmware upgrade.

do you mean turn off the wifi LED via the schedule function?

Can you share the firmware version you are using?

Not sure what kind of the WAN interface you used. If you are using VDSL, you would need to change your WAN interface to VDSL. The screen shot you shared is configured as WWAN. Maybe this is the reason that the status shown not active.

Could you share what is the firmware version you had?