Comments
-
Did you try to reboot NAS542?Also try to clear the cache of browser.
-
Can you able to see "Storage Manager"? Please share the screenshots about your problem.
-
Do you mean you have replaced two new 4TB Hard Drives in your NAS326, but you don't see any Volume in Internal Storage? Does your NAS326 detect these Hard Drives on Hard Disk page? If yes, because these two 4TB Hard Drives as new in your NAS326, you need to create it. You can refer to below link of knowledgebase:…
-
Hi McScotty, I can install NFS app of my NAS326, do you click "Retrieve List From Internet" and try again? What do you mean about All the instructions I see for this say that NFS is supported through an add-on app, but I don't see an option for that in the latest firmware.? Where did you see the instructions? What is the…
-
If you don't want to see the contents of folders via web interface, maybe you can use ZyXEL Drive App, it would be much easier. ZyXEL Drive: https://zyxel.to/zdrive
-
If you wants to access web interface of NAS326 from outside, you need to set a port forward rule on your router. Then, you can use WAN IP of your router + port number to access NAS326 from Internet. For example, I used external port 7000 to map internal port 80 of NAS326. After that, I can use router's WAN IP + port…
-
Which service of NAS326 you want to access from Internet? You can try to pair your NAS326 with myZyxelCloud. (https://mycloud.zyxel.com/) You also can refer this link: https://mycloud.zyxel.com/help
-
Hi sitro, Does your NAS542 use PPPoE? Can share your network topology and details information about Darkstat report? I checked the IP: 193.253.155.25, it seems belong to France Telecom (now Orange S.A.). https://en.wikipedia.org/wiki/Orange_S.A.
-
Two PLA4231 can be worked together. Can you describe more clear what kind of problem you meet?
-
Do you want to use PLA4231 and PLA4201 together? Or ...? In my house, they can work together. I'm use them. Router's LAN is connected to PLA4231, and PLA4231 is paired with PLA4201. My laptop is connected to PLA4201 via Ethernet cable, it works properly.
-
how about use IP only for your application?
-
if you have the Ethernet port on your PC, try directly connect to your WRE6505 via Ethernet cable, and you should able to get the IP address from WRE6505 and able to login http://zyxelsetup/.
-
What is your firwmware version? latest version:v2.00(ABDM.4)C0, WAP3205 v3 connect to router directly, my samba server is connecting to router, but I was set the static IP as the same sunbet as router, then I can access it over wireless and ethernet.
-
do you get IP address from WAP3205 from your router? make sure you have the correct IP address and try to ping gateway and google to see where the traffic broke.
-
Did you try reset default after you upgarde/downgrade firmware?