Hanamichi

Comments

Connect printer to your NAS via USB port. Then check it in control panel -> service -> print server.

in how to set up print server on zyxel nas 540 Comment by Hanamichi May 2020
What a bummer... maybe you should go RMA since it seems not just software issue now.

in NAS326: Installed bad new hard drive, now beeping and can't access old drives Comment by Hanamichi May 2020
Even reset button not working?

in NAS326: Installed bad new hard drive, now beeping and can't access old drives Comment by Hanamichi May 2020
You should set static IP for your NAS, and set port forwarding on your router to assign common ports (port 80, 21, etc.) to the IP.

in NAS 326 AĞ AYARLARI Comment by Hanamichi May 2020
Which Zyxel product? Model name and firmware version?

in Sharing wifi Comment by Hanamichi April 2020
Check this. https://homeforum.zyxel.com/discussion/2851/multy-x-firmware-release-notes-to-v2-20-abkj-1

in Multy X Firmware - v2.20(ABKJ.3)C0 - Release Notes Comment by Hanamichi March 2020
You can check this discussion. https://homeforum.zyxel.com/discussion/3295/multy-x-in-app-speed-test#latest

in Multy X Performance issues Comment by Hanamichi March 2020
You can refer to below FAQ link. https://homeforum.zyxel.com/discussion/1327/does-aishield-service-offer-a-free-trial/p1?new=1 And this discussion. https://homeforum.zyxel.com/discussion/comment/6689#Comment_6689 For your current account (activated AiShield service), you need to wait for it expired. Otherwise, you need to…

in How do I disable AiShield? Comment by Hanamichi March 2020
What's the network connection in your house? Does it like Internet---Modem---1st Multy X)))<WLAN>(((2nd Multy X? Where is Sky Q Mini Box connect to? Via Ethernet or wireless? Only Sky Q Mini Box has the connection problem? Does it able to get an IP address? Can you describe more information about "constantly can't connect"?

in Sky Q issues Comment by Hanamichi February 2020
You can check this discussion. https://homeforum.zyxel.com/discussion/comment/4299#Comment_4299

in Has the Multy X a firewall? Comment by Hanamichi February 2020
Here is the FAQ. https://homeforum.zyxel.com/discussion/142/can-i-manually-adjust-wifi-channel-through-the-multy-app/p1?new=1

in change channel on multy x Comment by Hanamichi February 2020
Which Multy series product? What is the firmware version? Can you also share your network topology?

in Sky Q issues Comment by Hanamichi February 2020
Mutly U doesn't support WPS. Has any problem you encountered? https://homeforum.zyxel.com/discussion/1656/does-multy-u-wsr30-have-a-wps-button/p1?new=1

in [Multy U] Will we ever see a WPS option in the application? Comment by Hanamichi February 2020
What do you mean that you want to transfer control of the network and the app? Can you explain more details what is your expectation?

in Multy X - transfer control app Comment by Hanamichi January 2020
Do you check Backhaul status on Multy App? How's signal strength? To my knowledge, Multy System will select the best frequency when reboot nodes/refresh topology, below are two way to re-scan to use best frequency. ．You can refresh Backhaul by the refresh button of Multy App. (Setting > Advanced Setting > Refresh) ．Or you…

in Backhaul traffic speed regression for latest version V2.20(ABKJ.2)C0 Comment by Hanamichi January 2020

More Comments

Hanamichi Ally Member

Comments