Comments
-
set local policy to 0.0.0.0 Phase 2 PFS to DH2 Phase 1 key group may need to be higher Encryption to AES128 check logs if Phase 1 show done
-
Have no problem here with Android 12 and IKEv2 post your settings
-
try here https://support.zyxel.eu/hc/en-us/articles/8805317185298-IKEv2-VPN-with-Pre-Shared-key-on-Mobile-Devices-Instead-of-L2TP
-
Another problem is User custom DDNS only auto works and not Public IP but Public IP will work on a select DDNS like no ip or DynDNS
-
Two WAN IP's that are different and are fully routable you likely have a DNS name to one WAN IP for the port forwarded because your still going to the same WAN IP that is down you will never use the other WAN IP so you need to have your DNS point to your other WAN IP.
-
you say its 10.9.230.144/29 255.255.255.248 so if you make a LAN subnet your side with that 10.9.230.145/29 and a PC on 10.9.230.146 you don't need SNAT in the tunnel and it should work
-
also currently not able to rate limit bridge traffic
-
I think this is the problem How many WAN IP's do you get from the modem? Spectrum will only give you one.
-
well I could send you the config but don't think it will help a I have removed some rules plus it corrects itself on reboot. I think how I caused it was making 29 rules move the bottom to the top to get this Then I made another rule that need to be moved to the top so I moved it one step at a time to not get the above…
-
we don't know what IP from 10.9.230.145 – 10.9.230.150 they want you to source from try 10.9.230.145 as SNAT
-
update was to do with a VLAN on switch as untag
-
The problem is the old ZLD could never do the speed that uOS can so at some point they had to do this.
-
Was hoping I can get some feedback if at some point I can NAT ports through a bridge on the FLEX200H 2.2.2.2:4444 > My IP:30000 >NAT> 2.2.2.2:4444 > My IP:9999 thanks
-
At some point I to would like to download the firmware but I don't know the reason why you can't. as it is you have V1.20 so next firmware it will update the standby