Comments
-
Hi there Have you tried reset the device to factory default by pressing the Reset button over 5 seconds?
-
Hi ggg It is a quite old model and I believe it has phased out many years ago. I afraid you might very hard to find support now. I found a similar post: https://community.zyxel.com/en/discussion/8647/p-660hw-t1-v3-firmware-upgrade FYI
-
Hi there If the VMG8828 was come from your previous provider, it might loaded its customized firmware which might limit some configuration and firmware. Which means you might not able to replace the customized firmware to a Zyxel firmware. For your reference.
-
Hi there The user manual in your post is for multiple models, some models support mesh, but some don't. You can check it on page 18, unfortunately, VMG3625-T20A doesn't support Mesh. FYI
-
Hi Bagner96 It is hard to fully understand your question. If the router can't connect to Internet, 2.4G/5G WIFI would not connect to internet either. Not sure what do you mean 30-30-30 reset? Normally, we press the reset button 5-10 seconds to make the router reset to factory default. Can you check it again after press the…
-
Hi, "xDSL Statistics" is for DSL detailed info. You should able to find the DSL link rate on the main GUI page. Are you able to find it on the main page?
-
Hi, If you downgraded to 517ABNY6C0 or older version and the issue disappeared, it possibly a firmware issue. Did you try downgrade it?
-
UPS: Power input: DC 12 V, 8 pin connector This is what I can find from Internet.
-
Hi, If your router was provided by ISP, I would suggest to contact the ISP to see if any newer firmware version available. There might some enhancement on newer firmware. FYI
-
Hi, I found a post that there is a new firmware for XMG3927-B50A V5.17(ABMT.5)C0. https://community.zyxel.com/en/discussion/11497/xmg3927-b50a-firmware-version But if your router was provided by ISP, you may need to check with your ISP for newer firmware.
-
Hi, Not very sure if you still have the problem? In your post, VMG1312 is normal after power cycle, do you mean you can't access GUI via WIFI after some time again?
-
Hi, For the new firmware, it may depends on your supplier. If your AX7501-B0 comes from ISP, you may need to check with your ISP for new firmware version.
-
Hi, "https://portal.myzyxel.com/" is for business models' registration with license. VMG8924-B10 is a home gateway model. Not very sure what you would like to do on VMG8924-B10A?
-
Hi, (ABQO.0)D0 and (ABMT.5)C0 are different firmware versions for XMG3927-B50A. It can't be loaded with different firmware versions.
-
Hi According to the images, it seems these two bridge WANs have VLAN. Not sure if your LAN devices could aware VLAN tags or not. Maybe it is the reason that you can't get the connection.