Smartqwerty  Freshman Member

Appreciate your help, thank you!

Great, looks like this is what I need. Yes, I wrote about percentages as an example, setting exact values ​​is not a problem. Can you clarify if I create 1 classifier rule, for example destination address 192.168.2.1, bandwidth 200 MBps - it will work like this: traffic to 192.168.2.1 will be slowed to the specified value,…

Good afternoon This is the solution! Thank you for your answer, I didn’t know that the stacking mode could interfere, I thought that the entire config would be overflowed.

Good afternoon. We investigated out the problem for a long time, the problem was not in the Zyxel switch. The problem is in the equipment installed by ITsec guys between my switches, I tried to assemble it with switches and routers from other vendors, including the ability to lower the MTU - nothing has changed. Thank you…

Hello But can i check this in switch web or cli? And what is maximal MTU? I didnt found this in references.

Now works fine, thanks a lot!

Sorry, I'll post the question again: When connected by a ring, the topology in the stacking menu in the switch interface is still indicated as a chain, not a ring. This is fine?

Good afternoon! Thanks for the answer! When connected by a ring, the topology in the stacking menu in the switch interface is still indicated as a chain, not a ring. This is fine?

Good afternoon! Your answer was very helpful, thank you! Based on the handbook, we don't have to write static routes, it looks like a full-fledged level 3 switch! I didn't find the cli reference for this switch in the downloads library, could you give a link to the download cli reference or maybe full documentation pack?…