accurro  Freshman Member

Hi If you are using the router in nebula (cloud managed) mode you can't use SSL VPN. This feature has been requested but not currently available under Nebula.

i have both full nebula firewall sites and site with firewall in cloud monitoring mode the function of "Show other devices" in topology is the same ie it doesn't work. in the cloud monitored senario (nebula pro) switches and wap are all full nebula (wax650s and xs3800s, xs1930-12hp) but the atp 700 is shown as ? with box…

Hi Melen just tested on a nebula pro network with additional zyxel kit connected (atp700 in cloud monitor mode and 6x xgs2210-52HP) box still greyed and un-selectable. Does that mean the atp700 doesn't send LLDP packet?

Hi Melen would need to test Shame to see the mac table of a switch is a pro feature i would consider that very basic function

Hi Stanley I have accessed this but this seems to defeat the point of Nebula? If I have to be on the LAN to access the device local GUI I would just ping the LAN devices normally through command line on my laptop? I have tested the network tools section but appears to have issues / bugs ie i can select the VPN interface…

thanks will test tonight

thanks that's great CLI is fine will give it a test

i have run this on multiple systems and it never returns any results - am i doing something wrong?

@Nebula_Freda thanks for the power setting bit but is the first part of the question asked possible? "for fine tuning of the wifi is it possible to extract from the system the signal strengths that each ap report that they see from and to each other?"

thanks - needed some more detail as took a bit of time to actually find this setting - for anyone else also looking: Access Point > Configure > Radio >> the main page just does power for all the APs - roll to bottom of page and select the AP you want from the list and then click the small edit on the top left.

Hi Joslyn thanks for the replys. 2. do you not think it causes more confusion by sometimes calling clients "stations" and sometimes calling stations "clients" would it not make sense to give an element a uniform name across products and UI? On all the NXCs USGs etc all the clients are called "Stations" 3.if only capability…

Can i add that if you have installed the Zyxel IPSec SecuExtender windows client and then want to use windows built-in VPN client again for other connections you will need to uninstall SecuExtender first, as the 2 cannot work together.

Thanks Chris will check this out

can you share the full solution please this seems a common issue

Hal one other point to check is the fibre linking the switches themselves, ie have you got the directions correct - straight patch leads, crossover patch leads etc...