baudetd  Freshman Member

this is my router , for update with file for 1 running and 2 standby ?

are you sure i didn't have problem like the previous version 5.36

hello Here is what I did to fix the problem: the router had reset, I accessed the interface via the default ip address. I downgraded the firmware to 5.35. then I reinjected my config and it worked. However, I still have some issues. when I connect to the interface, the cpu quickly rises to 100% and from time to time during…

Hello I was finally able to access the interface of the USG 20 routerI was able to update the firmware firmware download from website (released date: 2016-11-22) however, I did not find the latest firmware because I have another router that already has the latest version (released date: 2016-11-30) I found this link which…

I connected in serial but I can't log it because it asks me for a user name and password, my credentials are not working same in ssh However, here is the message I get when I log in ALERT!!image filesystem usage: 99%12K /rw/lost+found1.0K /rw/etc_writable/budget100K /rw/etc_writable/zyxel/conf101K…

hello thanks for the reponse it's surprising that it's activated because I'm the only one to connect to it and I was still accessing the interface a few weeks ago Is it possible to check with the serial console if authentication is enabled? Is it possible to do this over ssh?

hello here are the recommandations for using dante So You're Adding Dante to your Network? | Audinate | Dante Pro AV Networking is the gs serie is able to handle this ?

Hello here are the recommendations for using DANTE at the network level is the GS series able to handle this? https://www.audinate.com/learning/technical-documentation/so-youre-adding-dante-to-your-network So You're Adding Dante to your Network? | Audinate | Dante Pro AV Networking

hello here are the recommendations, can the GS series respond to this Dante uses the UDP protocol for audio distribution, both unicast and multicast. - Bandwidth usage is approximately 6 Mbps per basic unicast audio stream (containing 4 channels and 16 audio samples per channel). Streams are pre-allocated to a capacity of…

hello!! Ultimately after an update then a reset the switch works again

hi, ok it's good ! can you tell me more about the différent pages (,is there a doc? how could you also limit the flow on lan2 ? version firmware is 4.35 , it's time to update!

hello I will test it and come back to you with a conclusion

hi! this is ZyWall USG20 I found the solution ! by making the browser compatible thanks