pancho35m  Ally Member

yes right it seems to be that the camera is still working because if an action takes care then i got an email notification. in this email notification there are three pictures of the event. that seems to be working fine. I will do a reset on the camera and then i will check it again. thanks for your help

Firmware is V1.00(ABEQ.3)C0 LED is turned off The funny thing is email notification is working but if i want to connect to the camera via app the camera is offline yes

Hi Penny, thanks for your help yes i clear the storage and recording was on So like it is in your screenshot but no changes

Hey Team, sorry nobody has an Orbi so that we can test this. The AVM Fritzbox works fine with the Multimedia Receiver without Multy X in between. But do not get me wrong. A normal Consumer will not configure his Fritzbox for working Multy X and Multimedia. It should be like a plug and play Systems

My Labs are like this The scenario at home was like this. ISP <--> Speedport (from the Telekom) <--> Zyxel PLA5456 <--> Telekom Media Receiver 401 <--> TV The IP Range was 192.168.40.1 (Speedport Router) 192.168.40.10 Telekom Media Receiver and it works My Test Scenarios were like this: Lab 1: ISP <--> Speedport <--> Multy…

Hi team, i already shared my environment of testing. The differences between my test and the other test was the Router in front. ISP is the same it is Deutsche Telekom. My router is a totally based Telekom Router with Telekom FIrmware on it. The other router was a Fritzbox (AVM) 7490 with AVM Firmware on it. These is the…

with a router provided by the isp it works with a router from AVM Fritzbox is not working the IPTV 

Ok thanks a lot!

multimedia System over multy x is still working. No other action at the moment from my side to test.

ISP (German Telekom) < - - > Fritz Box AVM < - - > Multimedia Receiver < - -> TV On the Fritz Box AVM he has also an AP on the Ethernet Port This environment works With Multy X he setup the environment like this ISP (German Telekom) < - - > Fritz Box AVM < - - > Multy X < - - > Multimedia Receiver < - - > TV And in…

ok and what is the idea with facebook login or google+ login? So from my understanding it is necessary to have a myzyxel account

@Zyxel_Support The LED of the multy was blinking more than 8 hours red, so the device never makes a restart on the old firmware. I understand the mechanism behind it but in my case it never makes a reboot on the latest running firmware.....

@Zyxel_Support Thanks a lot for the information

Here you can read the orbi thing https://community.netgear.com/t5/Orbi/Support-for-vLAN-tagging/td-p/1266588 https://community.netgear.com/t5/Orbi/Support-for-vLAN-tagging/td-p/1266588

thanks @DrPepper So this is not a nice to have option it is a must have in Germany. Please check this