Dash 
Ally Member
評論
-
I think there only zCloud app could pair to NAs
-
What model are you using?
-
To reset the password, you can press the reset button until you hear one beep after two seconds. This can reset the password and do not affect the volume.
-
What model are you using? You can check the IP setting on the tablet to see what IP it gets.
-
I frequently use skype internet phone to work. and it works pretty well. Are you using the latest firmware? What kind of internet phone are you using? Are you stock in the register the account? Or the phone works but only one-way voice? Have you ever try to disable the firewall rule on your device?
-
What model of the device are you using?
-
You can set an Authority for each user to access your Data, so the user will need the username/password to access your NAS or Data.
-
Plug two PLA in the same extension cord, if the connection still drops every 5min, you may consider getting a new one or RMA. What is the model of the PLA?
-
From your last screenshot, it seems your NAS had once connected but not for now. You may check if your NAS can reach the internet (check GW, DNS setting). Use Network diagnosis to ping out, Control Panel > TCP/IP > Network Diagnosis. Rebooting the device probably helps in some cases. AFAIK, upnp is not working in double…
-
Have you press the reset button for over 10 seconds, and the power light will blink. Then the IP of WRE will back to default, and that will be 192.168.1.2 You will have to set your PC to the same IP subnet, such as 192.168.1.100/255.255.255.0 Next, access to the webGUI by typing 192.168.1.2 on the browser.
-
I use DeltaCopy as the rsync Server and backup the data from my PC. But I didn't occur any issue.This issue may relate to the rsync Server.
-
Any details and what's purpose? You create shared folders and publish it on Twonky.
-
Checked item 2 from below link. https://homeforum.zyxel.com/discussion/3370/faq-upgrading-latest-nas-remote-code-execution-vulnerability-firmware#latest
-
Please try to enable HTTPS on your NAS326. Then, add a port forward rule [external port <-> internal port] as 8483 <-> 443. After that, using URL to access your NAS326 from out side, for example - "https://abc123.zyxel.me:8483".
