Best Of
Re: Nebula - Error saving SSID Schedule
Hi users,
At the present, you can enable SSID schedule by using Nebula Mobile APP. Please go to SSID > Choose SSID > Advanced Setting > Schedule.
Re: USG310 Multicast to Unicast
Hello @Lukas0102
To transmit wireless multicast traffic to all clients as unicast traffic, choose the Multicast to Unicast option. Unicast traffic adjusts its data rate based on the needs of the application, and its retransmission mechanism improves the reliability of multicast transmission, although it also produces duplicate packets.
Alternatively, you can use the Fixed Multicast Rate option to broadcast multicast traffic to all clients at a specific data rate. To use this option, you need to determine the application's bandwidth requirements and enter the value.
James
Re: Zyxel NWA5123-ac Bridge Mode
Hi @Nmes ,
It appears that you are referring to the wireless bridge function. This function can only be utilized when both Root AP and Repeater AP are Zyxel wireless bride supported models as below.
But from what I understand in the manual the NWA5123 in Repeater mode can only connect to another Zyxel AP in Root mode?
You’re right. NWA5123 in Repeater mode can only connect to another Zyxel AP in Root mode, and it can establish the Mesh with any Zyxel AP.
Re: Zyxel NWA5123-ac Bridge Mode
If it can do that, you can look for "client mode". The AP acts like… wireless card for network cables (more or less)
mMontana
Re: LTE2566-M634 Firmware bugs and workaround
With WindTre I tested the thoughput at MTU sizes different from the default 1500.
At MTU size 1420 the speed instantly doubled with WindTre when connected to the same bands. Dropouts from CA are fewer. Device still get "promoted" to TDD, but this time can also change back to FDD and CA, which it does not do when 1500 is set. Strange, anyway, and I don't get if this is just a coincidence or actually an underlying defect in the firmware.
Hard to undertstand why there is no AUTO option, as the MTU is normally communicated by the network at connection time and even if faulty APN AUTO or Authentication AUTO are worked around, the MTU could still be determined by the network, instead of being hardcoded.
Angelina
Re: USG 200 Flex, AP Manual Firmware Update (missing)
Some AP have low versions then others
PeterUK
Firmware V5.36(ABWD.0) issues
Hi team,
we're facing stability issues once upgraded to new firmware V5.36(ABWD.0) on a couple of USG FLEX 700. The firewalls suddenly became unresponsive, no response from https gui and ssh, switching off the power is the only remaining option.
Both firewalls have been upgraded from few hours and this issue happened for two times. Do I have to reverto to the previous release which is V5.35(ABWD.0) ? We had no problem with it
Regards
Agor
Agor76
