-
I need to reset my password so that I can access EX3301-T0
I want to set up two wifi, and for that I need to log in. I dont have my password and need to reset it
-
Library update WWAN
Hello, help me update the library WWAN Modem name EMG5523-T50B
-
Zyxel router from Altibox
I am trying to connect my Melissa Home Connect to my Router, but how do i check Captive portals andMAC address restrictions?
-
C3510XZ-B1 Router Why can't I forward my ports anymore
Currently using a C3510XZ-B1 router. Came with my unit. I go through quantum fiber. I was able to port forward months ago when I first moved in, no problem. Even just the other day no problem. Now the ports are closed and I cannot seem to open them. I'm wondering if anyone can help me figure out why. I forwarded ports 80 &…
-
usb printer
how to connect a usb printer to the router PX3321-T1
-
LTE5398-M904 - Disconnection under Iliad Operator
Hi There My Router has more disconnection ( LINK UP, NO TRAFFIC ) with Italian ILIAD Operator. Many users has got this issue. Are there some workaround to fix it ? Last firmware doesn't fix this issue. Waiting from some good news. Cheers Andrea
-
VMG1312-T20B Help please
VMG1312-T20B V5.30 (ABSB.0) C0 after firmware update V5.30 (ABSB.5) C0 password from back label does not match! What to do? Help please
-
MPro Mesh WPA3 settings setup
I recently purchased a WX3100-T0 to extend my WIFI. I realised that some devices are willing to roam from the extender to the router ( EX5601-T1) but will never roam back. After some digging, I realized that the Mpro mesh setup does not copy the WPA settings correctly. My router is set to WPA3-SAE/WPA2-PSK while the…
-
NBG6604 LATEST UPDATE
Hi, how can I see that NBG6604 has made the latest update?
-
How to extract binary file
Hi, my product NBG6604 seems to be an end-of-life product so the new firmware is a zip file. So how can I extract the existing binary file? And what does it mean that I possibly have to reconfigure? How can it be done?
-
Mikrotik RB5009UG+S+IN and ZyXEL EX5601-T0
Dear allI signed up 1Gbps Fiber Optic Internet with my service provider and my ISP install Huawei EchoLife HG8240T5 and it has 3 Vlans Vlan10 for Internet Vlan20 for IPTV Vlan30 for VoIP and I replace it with SFP ODI DFP-34X-2C2 XPON-Stick from HSGQ insert it into Mikrotik RB5009UG+S+IN and I creat Vlan10 & PPPoe and I get…
-
4g support list for Zyxel ex5601-T0
Hi and thanks in advance. I have a Zyxel ex5601-T0 and I am trying to setup my 4G backup. I have a Huawei E3372-325 dongle. The link light comes up green on the dongle but the Zyxel router reports Card Description N/A and when I disconnect the WAN port I lose my internet connection. The system info page so no device for…
-
Port forwarding and web access panel
Hello! I am trying to get port forwarding set up on my router, but I can't. I am unable to port forward because I cannot access the web panel. (IE: connecting to xxx.xxx.xx.xx or xxx.xxx.x.x website for admin panel) But what happens then? I get a connection timeout. This is strange considering I have low ping everywhere no…
-
My WAN port Is capped at 100M
Model is EX3300-TO connection is fiber, cables can all do 1000m ive updated the firmware, my ISP should be giving me 1000M, i seemingly can find no other the reason for why this is.
-
Using a VMG8825-T50 with CityFibre
I've just had a 100Mbps CityFibre connection installed by Zen Internet. It works fine with the supplied Fritz!Box router with 112M downlink and at least 300M uplink (!) Using the Zyxel, the uplink speed is only 46M. To check if it is an Ethernet problem I've tried a different cable, and connected it through a 1G Ethernet…
-
Zyxel EX5601-T1 router
Hi, I have the Zyxel EX5601-T1 router. However, there's been a problem with settings whereby the buttons aren't working on the parental controls. I click them but nothing happens. Can you help please? thanks
-
configuration of AMG1312T10B wds
i have a modem of zyxel AMG1312T10B and configuring to wds funtion for using as a extender /repeater but i couldnt complate the configuration.please guide me step by step configuration
-
Can 2 routers form a mesh network?
Hi all, I have 2 Zyxel routers that support easymesh. But I have difficulties to make them work together as a single mesh network. Router1: DX3301-T0. This is a primary router that is connected to provider and has DHCP on. Router2: VMG8825-T50 I'd like to connect them using lan cable. I can see in a GUI that both of them…
-
VMG3625-T50B router Dealing with monthly GB quotas
is VMG3625-T50B router can Dealing with monthly GB quotas I want to disconnect internet on port1 for example when it consumes 10 GB in month. Is it possible ??
-
Scheduled reboot on EX5601
Hello all, I would like to schedule a night reboot on my home router EX5601. On webgui there is a section called "Scheduled rule" but I cant find information about how to use it. I also tried autoexecuting a command with putty but still no luck. Any idea? Thank you so much
