-
MSP Portal - sync or "global" security profile
It would be great to have an MSP level "security profile sync" so that we can apply security profiles to multiple Organizations and Sites.
-
MAC Bind IP Clients
ability to easily add/transfer an existing client connected to the network to be mac bound / fixed ip like currently available with USG / ATP on-prem
-
Prioritize by DSCP
It would be great if we could prioritize network traffic by DSCP. In my case, I do not need to make any changes to the DSCP priority, I would just like to know that AP's, Switches, and Firewalls on Nebula are prioritizing internal traffic by native DSCP tagging.
-
Network Quality - Alert on high CRC errors
I would love to have the ability to alert if there are switch ports that report a certain amount of CRC errors. This would help us to be proactive on the network. Also some weird failure types I have seen- switch speed dropping from 1000T to 100T or 10T (indicates wire issue), PoE status going up and down rapidly. It would…
-
HA Mode Nebula (Workaround?)
As much as we want to have a cloud managed firewall, we also want to have an HA mode configured to improve redundancy. Unfortunately this is currently not supported in Nebula, because a cloud managed firewall is essential I have thought about a "Workaround". It works as follows: In Nebula create an organization with 2…
-
Port Isolation Column
In Switch > Switch Ports, add an additional column to show if 'Port Isolation' is enabled/disabled on each port.
-
Map
When the monitoring page of a switch or access point is opened, the map zooms out to display all switches/access points belonging to the site. If there are several switches/access points, this makes it difficult to determine the location of the specific switch/access point that I am looking for. Perhaps have the Map center…
-
Client Description on Switch Monitoring Page
In Switch > Clients, devices can be named in the Description column. If I go to a Switches monitoring page and click on an active port, the MAC addresses detected on that port are displayed. It would be useful if this box had an additional column for the 'Description' that would display the names of any devices that have…
-
Support forward spoke site traffic to Internet from hub site.
This discussion was created from comments split from: Traffic Backhauling from Nebula VPN Spoke to Nebula VPN Hub Description: Feature support forward spoke site traffic to Internet from hub site. Click like if you think the feature is useful and beneficial.
-
Combine On Premise and Cloud Mode
Let us configure everything on premise and use Nebula to have insights on usage and stats, DHCP-Leases, Data-Usage, Application, VPN-Connections...
-
Source/Destination "External"
It would be convenient if we had the option to an "External" to the Source and/or Destination fields under security policy. Basically, I would like to allow traffic to all WAN/Internet resources, but not to any internal subnets or VLANs.
-
Support FQDN in Non-Nebula VPN peers
This discussion was created from comments split from: VPN Connection with DYNDNSDescription: Support FQDN in Non-Nebula VPN peersClick like if you think the feature is useful and beneficial.
-
Failover notifications
Hello there! We are using the
Zyxel LTE3301-PLUS and just wanted to make a suggestion. Many of us use
the router as a backup to the mobile network. If the fiber is
cut out, the mobile network is connected automatically. And it works
great! For many of us
in Europe it costs extra when the router connects to the…
-
Connectivity Check with auto-reboot
Following the firmware upgrade to the NR7101 Nebula it did not come back online. Therefore it was necessary to manually power cycle the device on site. The idea would be to include in the firmware a connectivity check following a firmware install that reboots the device to bring it back online.
-
Speedtest on USGFELX/ATP WAN interfaces
Please make it possible to do a speedtest on wan interfaces. It would be helpful on demand and, why not, also scheduled (by week, day, hour...).
-
messages from nebula
Ciao, sorry in advance for my english... I ask, if possible, to make sure that the messages arriving from CDR can lead to an identification of the client. In my case, with so many organizations, I have no idea where to look. Perhaps a good method would be to put also in the object: ORG NAME > SITE NAME > PROBLEM Thanks :)
-
Smarter Alerting
If a site's gateway is offline, there is no need to alert that an access point or switch is offline. Just a single alert is all that is needed. Allow a site or device to have downtime or off-hours, and alerts do not trigger during that time. The main issue is overnight outages from power or ISP issues, we just don't need…
-
Add a feature to kick inactive hosts in DHCP release table
Hi everyone, There is user who wish to have a "button" to kick inactive hosts regarding DHCP release table. If you have such the same opinion or you wonder this is a valuable feature, please have a "Vote" on this post. Idea from the post.
-
Set Hostnames by Nebula client description / MAC Address
I wish a really great feature :-) Clients are reachable via host based on their description in Nebula (Nebula description is mac based). New setting in DNS section: Add hostnames by nebula description (special characters will be replaced by hyphen in hostnames). Sequence:The administrator can e.g. set the description via…
-
Missing SRC_PORT option in firewall
Hi Zyxel, I like you brand and I went back from you almost after 20 years. I like that Nebula is evolving and it's future, but I'm missing some very important feature. In firewall what you call Security Policy I can't set-up as simple thing as source port from incoming traffic. I would be glad if this option will be add…