-
Installing Plex Server - unable to extract after app installation -NAS 520
Hi all, As stated I have downloaded the Repository and installed Plex Media Server, however when it takes me to the script installer page, after I upload the Synology Armv7 package for installation it is unable to install. I have seen a few posts regarding this and some have been successful some have not. I am working with…
-
Help with MetRepository and entware-ng for smb3 on NSA325v2
I’m trying to follow Mijzelf’s instructions on upgrading installing MetaRepository then Entware-ng to get smb3 working on this old NAS but I’m running into a number of problems some probably due to my lack of understanding of the instruction and some possibly due to the state of the NAS firmware (V4.81AALS.1) Firstly SSH…
-
NAS520 in a Boot Loop after booting with a Debian/OMV Boot Stick
Hello Everyone. As soon as I found out that the device was vulnerable from the outside/internet, I stopped using it and hoped for a secure update. Much later I see that Zyxel has completely given up on NAS products. I asked the smart internet and he/him/she/her/whatever ;) said you can run OMV (OpenMediaVault) with Debian…
-
nsa310 and nsa235-V2 admin doesn't have write access to admin share folders
so I have tried to install the samba 3 on both nsa310 and nsa235-V2. On both machines I don't seem to have write access to the admin share when logged in as admin. Using the share browser on the devices built in config page I tried to upload a file to the zy-pkgs folder I get the following error . . . This File/Folder is…
-
ech0raix
Two days ago, my Zyxel NAS326 was attack and all files are encrypted with ech0raix ransomware. Do you have any idea if there is a decryptor?
-
NAS326 500 Internal Server Error POWER On/Off SChedule
I get the 500 Internal Server Error when I try to change the POWER On/Off SChedule (switch off, delete Power On oder Power off). This appeared after the next tro last firmware Update. A new Power Schedule parallel to the existing cannot be implemented Can anyone help? Klaus
-
How do I install Plex for NAS326?
I have NAs 326 with firmware V5.21(AAZF.18). How do I install Plex for NAS326?
-
Personal Storage
After being disgracefully exited from asking a community question about NAS520 and the inability to restore apps after a Firmware upgrade. Like Lee 626 I am at my wits end. After upgrading the firmware on my NSA320s and NAS520 I too lost all the apps. I am also having difficulty in pairing my NAS520 to ZyXELCloud. Although…
-
NAS542 Raid 1 failure so Datas are on the Disk but didnt shown in File direktory
Hi, two days ago my NAS542 started behaving very strangely. Suddenly it beeped and the first two hard drives were briefly gone during a write process. After a short time the NAS restarted and started restoring the Raid 1 partition. This took almost 32 hours with just under 6TB. Afterwards I thought ok, everything was back…
-
Sync with google drive not working
hi, I just purschase the NAS326 because it can sync with google drive and it's not working. When I ask for the autorizathion code it gives-me and error What am I doing wrong?
-
NSA325 failing - can I move drives to a computer?
I have a NSA325 v2 with 2 drives totalling 4,5TB. So I suppose RAID 0. The NSA is failing - suddenly I lose contact with SMB, and the web interface is unresponsive or just serving a blank page. Rebooting solves it temporarily. I think the drives are OK, I did a scan with no failures. Does anyone know if it's possible to…
-
NAS542 Can't find NAS on the network after shutdown/reboot, not even after reset
Hi, I have a NAS542 (for some years now) and haven't upgraded to the latest latest firmware (without access to the NAS I don't remember what version is was), I know it's loaded with the version exactly before the last one. After some hard shutdowns using the button (that's how my kid learned to shut it off….) when booting…
-
NAS520, unable to retrieve list of apps
I have recently acquired the NAS520 and have been able to factory reset it and update it to the firmware 5.21. However I do not have any apps installed ( I am trying to download the Zyxel Cloud Agent). I receive the "Download list fail" when going through the App Centre. After going through previous posts with similar…
-
Is there a way to access my nas326 outside the home network - fritzbox 6591 cable
i have the problem that i can't find a proper setting to configure my nas in fritzbox that i can access outside of my network. i did it according to avm's instructions but it didn't work. maybe someone here can help me with my problem thanks in advance ich hab das problem das ich keine gescheite einstellung finde mein nas…
-
NAS326 defaults after restart or shutdown
NAS326 after reboot or shutdown defaults all settings and passwords etc.Every time after reboot or shutdown I need to set new password and set it up again and again.Is this by design behavior or there is solution?
-
NAS326 after firmware update SSH works HTTP does not, phone APP HTTPS doesn't work either.
NAS326 after firmware update SSH works HTTP does not, phone APP HTTPS doesn't work either. I saw many messages about clearing cache, etc. This is not the issue, it looks like HTTPS was disabled after firmware upgrade, SSH is functional with admin/password but HTTPS is being rejected. Phone APP also rejects HTTPS login, can…
-
My NAS540 is completely offline, after USB key upgrade
My NAS540 is completely offline, what can i do now ? " /bin/cat /mnt/partnerkey/buffer/DATA_0204 /firmware/sbin/info_setenv img_checksum_1 3ff199e80aacc1d3133b873e0b039089 Erasing 64 Kibyte @ 0 -- 0 % complete Erasing 64 Kibyte @ 10000 -- 25 % complete Erasing 64 Kibyte @ 20000 -- 50 % complete Erasing 64 Kibyte @ 30000 --…
-
Desktop Spinning
I installed my NAS 326 in January of 2018. I have had difficulty even accessing the desktop and now that I finally did, I attempted to go to Storage Manager and it has been spinning for a very long time. It eventually kicks it back to login and I start over.
-
PHP-MySQL-phpMyAdmin stuck at 45%
I've fixed the missing apps on my NAS520 thanks to Mijzelf, however when I try to install PHP it gets stuck at 45%. When trying to apply the solution of editing the ZYPKGS file through WinSCP I am met with the following issues. 2. Secondly when I try to disconnect from the internet to stop the file from being overwritten…
-
Plex for NAS326
How do I install Plex for NAS326?
