-
NSA310S - Data Access Problems
Hi all, I own the NSA310S since two years and now I am facing problems with the data access. I have some movies and TV shows on my NAS and use the fireTV stick to stream them on my TV. Recently, I can no longer access the movies via the TV stick or my pc. I can see the data but it is not loading. After a while it sometimes…
-
MyZyxel Cloud Automatically Installs itself and starts consuming too much Cpu.
Hello, I have Nas326. firmaware is V5.21(AAZF.12) (The lastes as of 23.03.2023) I have realized that Myzyxel cloud app is installing itself automatically. I uninstall it again it installs itself after a while. When I check via "top" command , it is shown that is consumes some CPU and after a while this CPU consumptions…
-
NAS326. Suddenly no access possible, login data wrong
Hello community,i have a NAS326 since 4 or 5 years and it works great (one year ago 2 new bigger Harddiscs).Yesterday i worked on documents on the NAS, so i know that the NAS yesterday works great.Today, i have to Work on a file, Windows says at connecting NAS: Wrong Username/Password.Im surprised... Okay, i check the…
-
NAS326, FTP behind NAT
Hello, this NAS resides behind NAT and I'm trying to do ftp backups using Cobian Reflector. The ISP agreed to forward ports 21, 5001-5004.Test connection is OK, but real jobs not working (most of the times) active or passive. I've read about ForcePassiveIP and i've been wondering is there a way to apply this since there is…
-
Firmware update dont work
The Mediaserver in my nas542 dont work. so i wanted to do a firmwareupdate. but the nas himselve cant conect to the server and i dont find any firmware for updating manually. can anyone help? Firmware on Nas are V5.20(ABAG.1)
-
NAS326 boot loop
Hello. My unit has suddenly lost the ability to boot properly. I had a look at a similar thread:https://community.zyxel.com/en/discussion/7306/nas325v2-reboot-loop But the links there are dead. So what can I do?
-
NAS326 - CPU Stuck at 100%
Hello Im starting to see an issue, where the CPU on the NAS constantly is on 100%. If I SSH to the box its not an application which is using all the power but Software IRQ. The only way, I have found to resolve this, is to cut the power for the NAS, and then it runs fine for some time. I have installed the tweak package…
-
NAS542 lost RAID5 after repair
Hi everybody, I hope, you can help me. First of all here are my system information: OS: Windows 10, build 19045.2604 NAS: NAS542, Firmware V5.21(ABAG.7) HDD NAS: 4 x Western Digital WD20WARX, 2TB each RAID level: 5 Couple of days ago, my NAS informed me, that my RAID is degraded and HDD #2 has a problem. The NAS offered a…
-
NAS542 con 4 discos RAID1, no me deja pasarlo a RAID5
NAS542 con 4 discos RAID1, no me deja pasarlo a RAID5. Cuando voy al volumen no me deja Administrar el volumen
-
NAS 326 / rsync
Hi, I have my first nas and I don't now, how to send files from linux to nas through rsync. Rsync is missing on nas side and I don't now, how to install. When I try send files to nas, I get error message: $ rsync ./* admin@192.168.1.3:/i-data/e75a191a/admin admin@192.168.1.3's password: sh: rsync: not found rsync:…
-
NSA325v2: Resizing to 16 TB (RAID 1) fails
Dear all - I recently bought my second NSA325v2 case and - after having taken Verified Hard Disk List for NAS Series into account - put in two 16 TB Toshiba MG08ACA16TE disks in RAID 1 mode: that worked like a charm. Now, I wanted to upgrade my first NSA325v2 with a pair of the very same 16 TB disks: first old disk out,…
-
Looking for the NSA320s FW4.80
Can the 4.80 firmware version for NSA320s be found somewhere?
-
NAS326 expanding from 2TB to 8TB... But never ending...
Basically I had 2 x2TB HDD installed… Few days ago replaced with 2 x 8TB. Of course first one disc, then the second. Then followed the 'resync' advice… Went O.k. So now was time for 'expanding' - started that - but it is already expanding for 5 days… And still continue… What to do to finalize that?
-
NSA325 v2: relocating swap space to an external USB storage?
All - I just came to mull over relocating the device's swap space to an external USB storage. But I am not yet entirely sure whether it's a good idea. Or really a bad idea™. Here is where I have stopped: Throughput is key! The HDDs are connected to the NSA v2 via a SATA II bus. SATA II according to…
-
NAS 310 & 320 NAS Starter Utility and firmware needed
I have a NAS 310 & 320. Please send me the link or files to download the NAS Starter Utility and last firmware for these units. Thanks
-
NSA310 - Jumbo frames settings are not shown in the TCP/IP screen
I know the NSA 310 is a discontinued product, but maybe someone did experience the same issue. As per from the subject, jumbo frames settings are not shown in the TCP/IP screen of my NSA 310 configuration dashboard. Such settings are clearly shown and descripted in the user's manual. The installed firmware version is…
-
need to change the IP address of a NAS326
In moving and getting a new ISP provider I need to change the IP address of my NAS326 formaly set to the IP mask of 192.168.0.1 with a addrss of 192.168.0.150 the new provider's router has a address of 192.168.1.1 tried to change this many time with only greated with a error after entering the address information.
-
NSA310 spare parts and are the NSA310 disk is readable on NSA320
Hi, Yesterday I had a problem and when I took my nas to local shop for fan cleaning the guy had dropped the unit and the plastic piece interfacing with the hard disk was splir from the PCB. TRied to solder but have some problems, namely, the HDD status lights are nor blinking anymore and they are on solid. I've got the…
-
using rsync on NSA325 v2
Hello everyone, I have a Zyxel NSA325 v2 and I am trying to download backups from a Linux server using rsync. However, it seems that my device does not support rsync. Is there any way to use rsync on my device, or would I need to change the main OS to a Linux OS to be able to use rsync? Any help or advice would be greatly…
-
NAS 326 V2 Rebooting continiously
I discovered today that my NAS 326 V2 keeps in rebooting continuously.it is configured with static ip address and 2 hard disks.Please help with troubleshooting and recovering NAS. Thanks
