-
Plex Media Server Not Installed
@Mijzelf, 1st, Thanks again for helping me out in getting Plex installed on my NAS326. But when I tried to run Plex Server, I got the message saying that Plex Media Server Not Installed. Not sure why it said that.
-
How do I migrate data from RAID 1 NSA 325v2 to a new NSA 326?
I have a NSA 325v2 with 2 1TB HDDs in a RAID 1 setup (old and almost full). I plan to buy an NSA 326 with 2 2TB HDDs and setup a RAID 1 and move all my data from the old NAS there. What is the best method to do so? I hope there is a way to put in 1 old + 1 new drive into the new NAS copy the data within the NAS, then…
-
Debian/OMV on NAS540 gone wrong?
Hi forum, recently I tried to get OMV and therefore also Debian on the NAS540 according to this tutorial. Something must have went wrong, however, because now the NAS is just stuck in a approx. 30 second boot loop, no matter whether there is a usb drive, sd-card or nothing attached. I can only assume that the boot loader…
-
zyxel cloud
why do I reset all zyxel cloud settings every now and then?
-
Backing up the 'factory' installed software on NSA325v2
I'm messing around with my NSA325v2, trying to install different packages and software. I will probably reinstall the complete operating system, but for the time being I'm just experimenting a bit and getting to know the system. As far as I can see, the NAS came preinstalled with a "Busybox" Linux distribution (not sure if…
-
Zyxel NAS 542 with Bootloop after Installing Debian-Linux with OMV
I have a Debian Linux installed on the NAS 542. While writing the kernel there was a message that there was not enough space on the drive. Then I send the command that the next start should take place with the Zyxel system. Now the NAS is in a boot loop, it starts with all LEDs in white, speaks to the USB stick very…
-
NAS 542 Owncloud update
Owncloud shows an available update to version 8.0.16, but if I try to install, I can no longer access owncloud. The only way to regain access is to uninstall then reinstall the original version of Owncloud. Does anyone have any suggestions ? #NAS_September
-
NAS542
Hi all. I have a major problem I hope you can help me with. In my NAS I have 4 harddrives (2TB, 3TB, 10TB and 12TB). All in Raid BASIC. For some reasend all my files was saved on the 12TB drive and nothing on the others. Now I have changed the 3 empty drives to JBOD and they apear now as one drive on 15TB. My question are:…
-
Logitech Media Server upgrade on the NSA325v2
I bought my NSA325v2 about 8 years ago and am still using the original version of Logitech Media Server (v7.7.1) that came with the NAS. I would really like to upgrade it to run the latest version (v8 or later), also because I would like to run the Spotty plugin for Spotify. The version currently installed does not seem to…
-
MyCloud.Zyxel not working properly on any browser?
I got a NAS326 a few months ago, trying to get the MyCloud service to work. I recall having software installed on my PC when I first got this thing and very very recently I had to reset everything on my PC in turn losing that software. It's not listed on their website, I set up an account to connect the device to it, but…
-
WMP will not install
Hi, I'm using a NSA325. When trying to open a video file on the server It opens up a error message pops up with a URL to install windows media player app. The link then sends me to a dead page. I can't play video files. does anyone have a solution? #NAS_January
-
Nsa 220 firmware
Hi i need neu firmware to my nsa 220 i haw firmware version: V2.30(AFB.0)can you plz help me i use windows 10 and can get to my nsa
-
Cannot install MetaRepository on nas542
Hi there! I'm trying to install the MetaRepository package on a nas542 (latest firmware) but after I download the web_prefix from http://zyxel.diskstation.eu/Users/Mijzelf/zypkg-repo/ and put it into the /i-data/sysvol/admin location (either via wget or via smb access) and refresh in the appcenter webui I don't see a…
-
forbidden message going through NO-IP url
I am getting a forbidden message when I tried to go through the Dynamic DNS URL from No-IP. This is what I am getting: Forbidden You don't have permission to access /pkg/WordPress/ on this server. How do I fix this problem? Also, the URL directs me to the login page instead of the WordPress site.
-
NAS326 - FW Update Fail?
I just tried to update the FW on my NAS326, and I think I did a boo-boo while trying to update. I clicked on the link (http://nas326) while it was stuck at 99%. And now I am getting this every time I log in. How do I fix this problem?
-
NAS326 System LED flashing, no access though Network
Hi, After power failure, my NAS326 system led is flashing constantly and I cannot access it through the network or detect through the utility. I haven't initiated a FW update. How can I login again? I have tried power-cycle and unplugging-plugging the power. Please advise. Thanks!
-
NSA-220 Plus - no HDD recognized anymore
Hi! I have an old NSA-220 Plus, started again a couple of weeks ago without any troubles. 2HDDs with 3 TB were running and data was stored as a backup. Then took it off the lan and power. Some days ago I started it again and from this point on, the NAS wont find any hdds anymore. I tried to plug the HDDs in and out, even…
-
NAS326 du is showing less used than df
My NAS326 is almost full. df indicates 3.4T used from 3.6T, but du indicates 1.4T used. Why the difference? #NAS_Sep_2019
-
NAS326 needs to use a more recent version of busybox
I bought a NAS326 last week to serve as a backup for the most important data on my TrueNAS. I have updated the NAS326 to the latest firmware release - V5.21(AAZF.10) As I was loading data onto the NAS326, I discovered that the 'du' command was showing an incorrect size when checking how much had been copied to a share. I…
-
NSA325v2 Data not accessable
Hello i have an old Zyxel NSA325v2 with 2 SATA disks and RAID1. Now one of the drives is broken. I have now the problem that i cannot access the data of the first disk. What i have to do to get my data which is on disk1? Is it anyhow possible to take the disk which is ok and connect it over SATA Adapter to an Windows 10…