-
Firmware V1.00 (ABUS.3)C0 Download
Hello, I have significant problems with my 5G router NR2101. As a solution, I would like to install the firmware: V1.00(ABUS.3)C0 again to see whether the problem will be solved. Please download. Thank you very much
-
[USG FLEX 100] VPN doesn't work
Hello, the VPN stop working and I cannot fix it. Can someone help me? This is the history log: 32 2024-12-26 12:13:43 info IKE Tunnel [RemoteAccess_L2TP_Wiz:L2TP_VPN_Connection:0x1b4cb4f2] is disconnected 192.168.1.254:500 84.78.243.245:23355 IKE_LOG 33 2024-12-26 12:13:42 info IKE Dynamic Tunnel…
-
USG FLEX 50W (USG20W-VPN) no graphs
Hi I don't have graphs on cpu or others when I clic on the line I don't have anymore graphs on traffic Since the version 5.39 of firmware Is there anybody who can explain to me how to retreive graphs? I don't receive automaticaly the daily report, the smtp server is correct because I receive the report when I clic to send…
-
Error message not secure, https is marked out.
I have a Zyxel ATP100 and when I go to logon I get the following message "Not Secure HTTPS"
-
update firmware
How to update the firmware usg flex 200
-
Issue establishing IPSEC-PSK VPN between Android 14 and USG20W-VPN
After many years flawless operation of IPSEC VPN between usg20w-vpn and samsung s9 (android 10), I have upgraded to samsung s24 (android 14). I am facing same issue as many have not being able to establish IPSEC-PSK connection. I have followed many documents and instructions found on this forum, but I am still missing…
-
IP/MAC Binding
Subject: Limiting Client Connections on the Wi-Fi Network I am reaching out to seek your expertise regarding an issue with limiting client connections on one of our Wi-Fi networks. Here are the details of the situation: Hardware used: Wi-Fi access points managed by a VPN100. Network topology: a VLAN dedicated to the Wi-Fi…
-
Zywall 110 is throttling bandwidth. How can I stop this?
I've been using my Zywall 110 for about 2 years now with no issues. Just recently, I decided to upgrade bandwidth with my ISP from 250Mbps up to Gigabit speed. Everything is all set up but I am only getting 300Mbps at the Zywall. If I go straight to the ISP modem, I'm getting full bandwidth. I just heard from my buddy that…
-
Zyxel USG 200 Bandwith limitation
Hi, I recently switched to a better internet connection, from 20Mb down/3Mb up to a 400Mb/150Mb. My problem is that if I use the ISP router bypassing my Zyxel USG 200 I get in my speedtests 400Mb/150Mb, but if i try using my Zyxel as normal I get 110Mb/15Mb. Does someone know if there is some sort of limitation? Or anyone…
-
update firmware USG60 from 4.20 to 4.73 (latest)
I need to update firmware a USG60 from version 4.20 to 4.73(latest). What intermediate firmware do I need to perform to prevent the risk of configuration disappearing.
-
Can I suggest Zyxel to block PC APP STORE?
How can I suggest Zyxel to block PC APP STORE this program from App Patrol?
-
dns content filter UsgFlex500 domain environment
hi, I have an usg flex500 that protect my microsoft AD and I have configured/activated the DNS content filter but I can not see anything detected; my clients's DNS point to our domain controllers. I don't know where is the problem. thank you.
-
CLI command "schedule-run"
I'd like to discuss two things within this post. a) Is there a full CLI description for the "schedule" commands within the console environment. I can't find any CLI documentation on the following commands: schedule schedule-run schedule-object I'd especially like to know what "schedule" and "schedule-object" can do. I have…
-
Destination NAT on VPN
I read this: https://mysupport.zyxel.com/hc/en-us/articles/360003321659--ZyWALL-USG-How-to-configure-VPN-SNAT-on-Zyxel-gateways In particular this picture: The first part is very clear: we have LAN1, we have to reach REMOTE with FAKE address. But the latest, DNAT that does the contrary, seems a Virtual Server NAT setting.…
-
SCR 50AXE IPSec VPN only Site2Site?
Hello, I bought an SCR 50AXE privately to get a little more involved with the Nebula Cloud. I have now put it into operation and replaced an AVM router. The info sheet said that the device supports IPSec VPN, which I wanted to use (Android smartphone, Windows tablet). In Nebula itself, however, I can only find the option…
-
SCR50 AXE trial licence is valid or not?
Hello, I'm using Nebula accessing my SCR50 security router with trial licence. At some configuration poins the message appears: "This organization is using the Base Pack version of Nebula.Advanced features can be unlocked by purchasing a Nebula Plus or Pro Pack License". Clicking on it brings up the licence and inventory…
-
Strange behaviour on USG Flex 100v2
Something strange is going on with the DNS settings on my USG Flex 100v2. When I set the DNS on wan to my ISP's DNS, one of my computers will not connect to the internet. Well it will connect but then it won't, so it's back and forth. Sometimes it works, sometimes it doesn't. No other computer is affected by that. Sadly…
-
VPN L2TP no ping LAN
Hi. I have configured an L2TP VPN on the USG40. The VPN connects, but devices are not responding on the network. I can't log in to the router, the router doesn't respond to ping, etc. I am attaching screenshots of routing and security policy. what else should I check?
-
USG Flex 200 rack mount "ears"
We need several pairs of the rack mount "ears" for the flex 200 firewalls. Where can these be ordered at? I'm not finding them in the Zyxel store.
-
Traffic between tunnels (and NAT)
Let's say we have three sites: A, B, C. Between A and B: policy-based site-to-site tunnel Between B and C: policy-based site-to-site tunnel Then we need that an host (a single host) from site A reaches an host or a couple of site C. Only So the config would be On A: -policy route with source host, destination host, next…
