-
Some question about the ATP
Hi I want to switch mine into "Live" Mode soon. Before that I can switch from the old Router to the ATP I need to setup something. Most work perfect. I just looking for a way to block Bad TLD like: .to, .li,... and other. Can I do that in the Contend Filter? Thanks
-
USG40 WLAN port Offline
Good morning, I have a USG40 unit and for two days I have had a problem with it, sporadically the WLAN interface goes offline, the only solution I have found is to reset it. Reviewing the log I find these reports but I don't know what I should do, can someone help me with the solution? Thank you. I copy part of the log 113…
-
SecuExtender IpSec 6.6.87.108 Install failure in Windows 11
Installer fails with error code 1603. I have removed any trace of older installations including folders/files, network adapters created. Restarted windows multiple times. I am still able to install/uninstall the older SecuExtender version 3.8.204.61.32. But that doesn't work with my server due to Algorithm compatibility.…
-
USG 110 firmware 4.72 no SSO support?
Hi all,I am working on USG 110 with firmware 4.72, I am trying to configure web authentication with SSO , but I cannot find the SSO config tab (check the attached image)in the release note of the 4.72 it states "Remove SSO GUI page for Single Sign-On Agent will be end of software service by the end of September 2022."Does…
-
USG 100 Flex and German Magenta IPTV
Hello, my USG 100 Flex is running very well so far. Unfortunately I can't get my IPTV to work. After these instructions I set everything. https://support.zyxel.eu/hc/en-us/articles/360004093659-IPTV-with-multicast-and-IGMP-USG-ATP-VPN-. Unfortunately the picture stops after 5 seconds. So when switching from unicast to…
-
LED RED - RESTART USG - 1100
Good afternoon everyone, how are you?We have USG1100 on a client, the firewall hangs and restarts, the SYS light is lit red, can you help me solve this problem?
-
SAML support (for AAD authentication) anywhere on the roadmap
Hi ! I've seen some very old posts asking about this, but nothing since. Does Zyxel have SAML support on the roadmap, coming anytime soon ?
-
MAC OS Ventura 13.0 Support for Zywall Secu Extender
MAC OS Ventura 13.0 Support for Zywall Secu Extender Unsupported MACOS Version any idea when new version will be around?
-
USG Flex 700 WAN Trunk
I only have one WAN from my ISP and the default trunk contains both ge1 & ge2. I was going to create my own WAN trunk with only ge1 included, but you still need to configure a load balancing protocol. My concern is a loss of bandwidth I have been experiencing. I have ge2 shut down, but how can I create just one WAN port…
-
Disable Authenticate Client seting USG310
Today, I thoughtlessly checked "Authenticate Client Certificates" in the web access settings Of course, I didn't save the certificate for myself beforehand and I turned off the option to log in without SSL. I did it here manu. https://kb.zyxel.com/KB/searchArticle!gwsViewDetail.action?articleOid=012061&lang=ENOf course,…
-
SSL VPN Not Working Post ATP200/800 Firmware Upgrade
This morning I was logged into our ATP800 via SSL VPN and then RDPed into my PC to run server updates. They were mostly completed, so I moved on to updating the firmware on our routers. I started with a remote site (ATP200) and the upgrade went fine. All devices there were accessible afterwards. Moved on to the local site…
-
ATP100 - false/positive McAfee/Trellix amupdate.exe
Hi, today a customer send me about 500 emails generated from the ATP100 CDR feature stating that malware was detected. It showed in the logs that the amupdate.exe was detected as malware. amupdate.exe belongs to McAfee/Trellix Endpoint Security Software. Here is the Hash of the detection: 7C32EC1E282EFF6530D0DE979687537E…
-
HTTPS login from lan
Hello, is it possible to enable https login from lan? I found this https://support.zyxel.eu/hc/en-us/articles/4403947447186-USG-USG-FLEX-ATP-VPN-How-to-allow-HTTPS-Web-GUI-Access-from-WAN-, but after following the steps and applying them to the lan it changes nothing except showing other port after IP adress…
-
RE: USG 20 with vpn
Do you offer any software or services to improve my USG 20?
-
Content filter does not filter pictures on Google search
Hello, I have a USGFlex 200 with ContentFilter (WebFilter & DNS-Filter) running in a school environment. Filter categories (pornopgraphic content and explicit nudidity) are activated. Filtering works fine for URL's (p.e. youporn.com), but not for picture searches on google.com (explizit pornographic pictures are shown). Is…
-
Zywall Secuextender and MacOS 13 Ventura
Good morning to all. Sorry to bother and introduce myself this way but, as in subject, I've problems since yesterday I upgraded to MacOS 13 (I'm in Apple Beta tester program). Since that, Zywall SSL VPN client rel. 1.2.4.1 refuses to start, returning the message in image. Since I use the app with a couple of customers, is…
-
Zyxel Flex 500 VPN using Active Directory Authorisation
OK so Im pulling my hair out on this one. Active directory is setup correctly in AAA Server section and is working to the extent it allows logins to sessions on the firewall from its web interface (not that we use this functionality but a good way to see if you can login using AD credentials) But if i try to set the same…
-
Runtime Mobile Security - Error: Unable to communicate with remote frida-server
I am having an error trying to communicate with the frida-server from RMS. Frida-server is already running but, when I try to access Runtime Mobile Security I am getting the following error: "Device not connected. Runtime Mobile Security I am here to try again. If You still see this error and the device is correctly…
-
Problem after firmware update on a USG flex 500
It seems that after a firmware update, my connection to the internet is always down. I'm using a cable modem, and everything else is working. A simple renew of the dynamic DHCP address gets the FW the same information, but still no connection to The Internet. Resetting the cable modem and then doing a renew seems to…
-
How to reach an external server on a USG1100 firewall
Hi, I need to reach an external server (IP 20.103.254.144) through the ports 80 and 443 of a USG1100 firewall from the clients of my LAN. At the moment the firewall blocks the outgoing flow. I found lot of guides about NAT service for incoming packets to an internal server but nothing about the opposite. I have to go out…
