ATP200 firmware update impossible

Peppino

I have an ATP200 with the following fw versions installed in the flash:

Upgrade of any of these banks is impossible since either trying over FTP, or HTTP, after the upload of 532ABFW0C0.bin is finished, the serial console drops a Firmware not compatible! message.

Can you please advise how can I overcome this situation?

Peppino

I have also tried with 5.30(ABFW.0) version, but the result was the same...

PeterUK

Maybe try run standby firmware then update it? 

Zyxel_Cooldia

Hi @Peppino,

Please follow steps below to update firmware.

1) Backup partition 2(current running partition) startup configuration file.

2) Reboot on partition 1.(Switch running partition from 2 to 1)

3) Update V5.32 firmware on partition 1.

4) Apply 1) configuration file on partition 1.

Peppino

Zyxel_Cooldia said:

Hi @Peppino,

Please follow steps below to update firmware.

1) Backup partition 2(current running partition) startup configuration file.

2) Reboot on partition 1.(Switch running partition from 2 to 1)

3) Update V5.32 firmware on partition 1.

4) Apply 1) configuration file on partition 1.

Thank you, it worked! What is causing this?

Zyxel_Cooldia

Hi @Peppino,

It could be related to firmware corruption on running partition.