Hi guys, I observed a problem with both the command line parser and the output of "show mac address-table port". The switch model is XGS2210-28 on FW 4.50. On the switch, two trunks are configured: --- trunk T1 trunk T2 trunk T1 interface 25 trunk T1 interface 26 trunk T2 interface 27 trunk T2 interface 28 --- But I can…
Currently with IP Source Guard Static Binding you can only add one IP to one MAC but what if you have many IP's to one MAC.
Hello, I'd like to add some high speed copper ports to my XGS1930-28 but right now zyxel sells only 1gbase-t or optical 1/10g. There are now plenty of low power 10gbase-t SFP+ OEM choices from marvell(Alaska series) or aquantia(AQS series). If SFP+ power budget is an issue both makes 5gbase-t variants(Marvell Alaska…
Hi there, There is a general disadvantage in switches web interface, which can be improved very easily - too short column widths in Port Status table. Change the width of "Name" column from "50" to ... at least "200"! Most of people now do have wide screens on their computers/laptops/etc, so it is more comfortable to have…
To test link reliability, we need quick ping on the switch. Here is example from other vendor: SW01-CORE-L3-0205-F3> ping 192.168.12.21 source 192.168.12.19 rapid count 1000 size 1500 PING 192.168.12.21 (192.168.12.21): 1500 data…
I have been using the 3700 series for a while now. I noticed that you can configure multiple port settings using "interface port-channel x-y". I tried the same strategy with VLANs but it doesn't seem to work. ====================================================== GS3700(config)# vlan 5-20 vlan *5-20 % Invalid input…
It looks like you're new here. Sign in or register to get started.
