-
lost Private Encryption Key
there is any way to recover Private Encryption Key from saved configuration?
-
More reference incorrect
USG FLEX 200H V1.20(ABWV.0)ITS-m4447 I remove routing rules yet they still listed for ge5 after refresh
-
NAT -- USG FLEX 700H
Good day, I have a problem with the NAT option of my USG FLEX 700H, I have created 19 rules of which they are applied randomly when I restart the device, some work and others do not, I restart again the USG FLEX 700H, the rules that did not work Now they already work and the ones that were already working stop doing so, it…
-
Routing ping check block reports incorrect interface ping check as DEAD
USG FLEX 200H V1.20(ABWV.0)ITS-m4447 USG40 OPT WAN IP VLAN443 192.168.44.2 255.255.255.240 Flex200H with a routing rule incoming VLAN47 next hop VLAN443 ping check 192.168.44.2 VLAN443 192.168.44.8/28 gateway 192.168.44.2 ping check no-ip.org bounceme.net any When on USG40 I block VLAN443 to Zywall for just the routing…
-
Where can I download 1.20(ABWV.0)C0 firmware?
link leads to portal.myzyxel.com where H series is missing. Is there any other place to download 1.20 firmware?
-
Trunk reference incorrect
USG FLEX 200H V1.20(ABWV.0)ITS-m4447 Even when I remove bottom rules to have 20 rules the reference still thinks the wrong one is their the problem might be linked to this when it happens. Been seeing this error - Page 2 — Zyxel Community After a reboot its correct
-
LAN ARP leak to bridge
USG FLEX 200H V1.20(ABWV.0)ITS-m4447 WAN1 Ge1 Unassigned IP DMZ Ge7 Unassigned IP Br0 Unassigned IP I'm seeing ARP on the br0 WAN1 and DMZ that should not be there
-
Flex200 H over bridge was allowing ICMP when blocked
USG FLEX 200H V1.20(ABWV.0)ITS-m4447 WAN1 Ge1 Unassigned IP DMZ Ge7 Unassigned IP Br0 Unassigned IP There is no rule that allows from WAN1 to DMZ for ping when I make a rule at the top of the list from WAN1 to DMZ ping block it did not block it and as for from DMZ to WAN1 it blocks fine I then checked session monitor which…
-
VPN for macos
Hi, Could you please confirm if the IPSEC VPN CLIENT WIN/MACOS license is necessary for the USG Flex100H? In case of a negative response is there a free-of-charge way to connect to the firewall by VPN? Also, from which macOS version does the Zyxel VPN client start to be supported? Thank you.
-
How to override-direct-route
Not listed in UI but by SSH edit running vrf main routing policy-route override-direct-route true commit copy running startup to disable vrf main routing policy-route override-direct-route false This option is helpful for some setups if you don't want to use Allow Asymmetrical Route
-
uOS 1.20
Hi team. When is the uOS 1.20 update going to be released? Was it scheduled for April 15? Thanks
-
HA PRO on FLEX H SERIES ?
I don't see the availability of HA PRO in FLEX H SERIES specs. It is supported or it will be supported in next future? Today i saw that my 2 VPN100 are End-of-Life…
-
Modifying BWM rule lockup
USG FLEX 200H V1.20(ABWV.0) Testing by www.youtube.com on UDP port 443 for the of a 4K video I make one rule with the following Incoming Interface ge4 LAN Outgoing Interface ge2 WAN2 Service Object UDP443 Download Limit 20Mb (yes not enough but part of the test) Upload Limit 4Mb Priority 7 You then watch a 4K video like…
-
DHCP Table - edit host names
When will the host names in the DHCP table be editable ? Having a huge DHCP Table with dozen of reservations it is a real pain without being able to enter a meaningfull host name. I know firmware is planned for april 2024 but let's be honest here H series (uOS) was just not ready to be sold and i feel trapped now even more…
-
Been seeing this error
most on routing and NAT rules moving them about
-
Error when changing VPN to "Nailed Up"
When the VPN is added to Zone LAN (or any other zone with a physical interface), I cannot change Phase 2 Initiation from Auto to Nailed Up. The VPN is deactivated and not connected. When it's added to IPSec_VPN I can change any time. Also please tell your web designer to not make the error dialogs a fixed height. Set CSS…
-
Web Filtering and APP Patrol Problem in USG FLEX700H
In my USG FLEX700H the Web Filtering and App Patrol i snot working, this problem startes on Saturday 20
-
Up time UI not loading in V1.20
USG FLEX 200H V1.20(ABWV.0) Everything now has spinning circles in UI then I see this: After 10mins the UI loads fine my site to site on USG60W show its not connected then if I go to IPSec VPN on FLEX200H the UI goes back spinning circles would you like to remote check it?
-
HTTPS Domain Filter enabled cause web pages to delay loading
USG FLEX 200H V1.20(ABWV.0) bypassing DNS lookups to not go by FLEX due to problems now even when not in use by Policy rule if HTTPS Domain Filter is enabled web pages get a delay when loading which V1.10 was faster. Cleared browser cache With HTTPS Domain Filter is enabled Cleared browser cache With HTTPS Domain Filter is…
-
Small cosmetic / annoying GUI things
Not sure how many of those you are already aware of. 1 - Odd default description value "user add" in Object > Zone > Add. 2 - Changing parameters and the trying to edit the same item again often gives a warning. The system should just check that by itself and reload in the background, shouldn't it? 3 - Most text inputs…