-
My DNS setup BROKEN by V1.20(ABWV.0)
USG FLEX 200H V1.20(ABWV.0) Just upgraded and already problems that are not in V1.10 which I did found and report when I was testing 110ABWV1ITS-M3715 and 110ABWV1ITS-24WK05-M3737.bin which now need to be fixed in order for my to test more. I will post a setup of the problem in a bit...I did notch the enable toggle for…
-
POE problem Flex 500h
I really do want to like the h series. IThere are so many flaws…hopefuly the next firmware brings something more to this at this stage unfinished product. I watd to try the much advertized POE feature. NO GO. from Poe to POE+ devices tried and plugged into P3 oror P4 + Switched POE to enable in the port menu … NOTHING. Do…
-
Multiple client-to-site Remote Access VPNs
Dear zyxel support, we previously had an ATP500 firewall, now we switched to USG FLEX 500H. in the ATP500 we was able to create multiple VPN connections of type "Remote Access (Server Role)", this way we could isolate different customers with different VPN Settings. I can't find a way to achieve the same goal on the new…
-
How to prevent multiple disconnection notifications of Zyxel ZyWALL SecuExtender VPN client?
I have Zyxel ZyWALL SecuExtender VPN client. After disconnecting SecuExtender is notifying three times about disconnection in right bottom notification area of Windows. How to prevent multiple notifications but leave only one notification?
-
Re-enable the web-GUI of a FLEX 500H with ssh terminal
Hi, I should reactivate the web-GUI interface of a Flex 500H if I try to check the status from ssh terminal with commands show state vrf main http-server server show state vrf main http-server secure-server both result disabled..... I tried to re-enable them from ssh with commands edit running vrf main http-server server /…
-
Change logging intervals w/o rebooting?
Settings I want to change: / logging send device-information "interval" "3600" / logging send system-status "interval" "60" / logging send interface-statistics "interval" "60" Is this possible without uploading a .conf and rebooting? @Zyxel: this should REALLY be in the web options! Also for older models! You have a…
-
site-to-site VPN works, but no ping/traffic
Trying to migrate the pinned up VPN connections from my F50 to the F200H. Remote is a F200. Set up the connection with the same parameters, worked on the first try. Connection is steady – but no traffic is possible. IKEv2 PSK Phase 1 DES/MD5 AES128/SHA1 3DES/SHA1 DH2 Phase 2 AES128/SHA1 3DES/SHA1 DES/SHA1 DH2 local is…
-
DHCP conflict
Creating a DHCP server with the same subnet disables an existing DHCP service on another interface. WITHOUT WARNING! This is terrible! Even the oldest Zyxel devices I have seen check against a list of conflicting subnets. Please fix this!
-
USGFLEX500 slows down FTP downloading in loadsharing mode
I configured USGFLEX500 with load sharing (WAN1 and WAn2_ppp) for two providers. I defined a trunk selected weighted round robin. With download and normal surfing load sharing between two providers works fine. Also downloading a file of 2.4GB with FTP works fine. But uploading the same file with activated load sharing…
-
USG FLEX 200 Captive Portal Configuration
Hello dear all I need help zyxel USG FLEX 200 captive portal I use it as a controller
-
USG FLEX 200H VLAN where? web interface toddler version?
Configure VLANs, where is it? I'm learning this device is not as great as my Flex 200 (non-H) Why is the web interface designed for a toddler on a tablet? If zyxel is taking notes from the Windows 10/11 GUI playbook where they think everyone is using a table, that's dumb! The older web interface is much better, and scales…
-
Does the Flex-H not support LLDP?
It doesn't show up on any of my neighboring devices, so I guess "not yet"?
-
USG FLEX 100
Hola amigos, me gustaria saber si hay algunas certificaciones o cursos en Español para poder gestionar correctamente mi Usg Flex 100 desde cero. Soy de Panamá, saludos cordiales.
-
SSL VPN disconnection problems on windows 11 client
Hi, We are facing a connectivity issue on a win 11 laptop (ASUSPRO P3540FA) The connection works fine on Ethernet, but drops over Wifi after few seconds. We have ZyWall SecuExtender 4.0.4.0 client installed. Here are some things we tried in order to fix the issue: Reinstalled the VPN. Updated Windows11, BIOS and Wireless…
-
need some assistance regarding with my USG60
I just want to setup a SFTP setup here at my office request by the client, i need some help how to comply this
-
USG FLEX 500H - web access does not work correctly
hi, I cannot access my firewall via the web interface. I can log in but then I have hourglasses running in all my dashboard windows. I restart the firewall from nebula and then everything works again. unfortunately after a few days the problem recurred. This doesn't seem to affect its operation. Internet access works. I…
-
USG FLEX H models: security services by policy?
The previous ATP and USG FLEX models could be switched to inspection by policy ("secure-policy-style advance") instead of using IP exception to exclude the unwanted services. The table in Firmware Release Note V1.10 doesn't mention this feature as not yet supported, but I haven't found it nonetheless. Is the function…
-
Serial comunication not clear on USG FLEX 500 H
I have encountered a peculiar behavior during serial connections with the USG FLEX 500 H. Specifically. I need to press the 'Enter' key multiple times to fully display all the expected output on the terminal.
-
Where is SNAT?
Our US suppliers are showing that the only available units are this new H series. We purchased one thinking it was simply "hardware only" because otherwise everything is bundled with licenses. What we found is this new cut down interface with critical features missing. Calling in to the support line was even less helpful -…
-
Serial comunication not clear on USG FLEX 500 H
I have encountered a peculiar behavior during serial connections with the USG FLEX 500 H. Specifically. I need to press the 'Enter' key multiple times to fully display all the expected output on the terminal.