-
FLEX100H: Domain Zone Forwarder not go through Policy-based IPsec VPN
As a follow-up question to: The configuration of Site1 and Site connected through Policy Based VPN: There is a DNS server in Site1 (Server1) for internal domain. Clients from Site1 us Zyxel1 as DNS server. Queries to local domain are properly forwarded to Server1. A Domain Zone Forwarder for local doman to Server1…
-
FLEX200HP V1.30(ABXE.1)C0 issues with UK BT PPPOE
Hello, I am a UK user with BT broadband. I use a draytek 166 UK version as modem and have PPPOE connection linked to the P1 of my FLEX200HP Since V1.30 patch 1 the FLEX200HP has dropped the connection with the PPPOE and now keeps saying 'ERROR: Failed to dial.' when I try to connect manually from the WEB GUI. Can you…
-
FLEX100H: Traffic from Zywall not go through Policy-based IPsec VPN
Hi, I have two sites connected by Policy-based IPsec VPN (created with wizzard) as: Site1 Site2 -Zyxel1 ←Policy-Based IPsec VPM→ -Zyxel2 -Server1 -Server2 A VPN is working, traffic flow between Server1 and Server2. However, I could not access Server2, from Zyxel1. There is no response to:Zyxel1> cmd ping Server2, and I…
-
Flex 100HP - wrong "password changed date" value
Hello everyone, I went for a walk among the settings of the new Zyxel family POE firewall and I noticed that the firewall tells me that yesterday (2024-10-10) I changed my password: I never changed it since first installation (2024-10-04).
-
Firmware USG20
Good morning, everyone, I have found an old Firewall USG20 with firmware 3.30, I would like to use it for testing but I need to upgrade it at least to firmware version ZLD 4.20 to be able to use it. Support is no longer active and I can't find the 4.20 firmware download anywhere, could someone kindly give me a link or a…
-
FLEX100 + GS1200-5HP v2 and VLAN
hi, I have a Flex 100 firewall. On one port, there is a trunk, including VLAN55, going to GS1200-5HP2 switch. The switch has two relevant ports for this question: one of them is in trunk mode, where the trunk includes VLAN 55, connected to NWA1123 -AP. The other port is untagged, and set for VLAN55. Now: traffic flows…
-
Odd MAC to no where
V1.30(ABWV.1)ITS-24WK47-m6271 So its fixed now but was really odd I had a VLAN47 with a reserved IP 192.168.255.41 to MAC VMtestPC the VMtestPC get the IP does the ARP to the gateway 192.168.255.39 send a ping but then the gateway send the reply to this known to me MAC Microsoft_f8:a1:0a (00:15:5d:f8:a1:0a) even if I ARP…
-
WFH VPN impacted after updating 100H to 1.30(ABXF.1)
Two days ago updated my 100H to the latest 1.30(ABXF.1) from 1.21 firmware version to resolve the issue of the device locking up/freezing every 3-5 days at random times (hopefully I will find my answer by next week). My new issue is that my business computer VPN connection is now so slow that it takes 20 seconds to open a…
-
USG FELEX 500H, Request failed with status code 500
Device update does not work! The update does not work through Nebula! Even though I bought the license, nothing changed!
-
How to Setup a NAT Rule (Port Forwarding)
I would like to know how to set up port forwarding for my QNAP NAS with the Zyxel USG Flex 200H. The menu at USG FLEX200 is slightly different from the old USG110
-
2 ISP (WAN 1 and WAN 2 ) USG FLEX 200
I need to create two vlans on LAN 1 Vlan 1 -> bussines network --> WAN 1 but failover to WAN 2 Vlan 2 --> private network --> WAN 2 but failover to WAN 1 Can you help me on how these two Vlans should be configured? Thanks in advance.
-
USG FLEX200 HP Update problems
Hello I am trying to put a new USG FLEX 200 HP into operation. It is currently running with firmware V1.10(ABXE.0) Unfortunately I cannot connect to the update services. I get the error: Device Registration Status: Not Registered Request failed with status code 500 The device is registered in Nebula. I also see that there…
-
Big FQDN list cause UI and FLEX H lockup
FLEX 200H 1.30(ABWV.0) So I have a group (one big one with 2 in) of FQDN and its causing a lockup here is the list I also have a big list of SMTP address ranges This is a Error after a reboot / object address-object address "office_com" "type" "fqdn" "*.office.com" "expire_ttl" "true" / object address-object address…
-
FLEX100H no messages sent to syslog server
Hi, I've configured syslog Remote Server. However, no messages is sent to syslog server. Syslog server is accessible from Zyxell. Any suggestion? firmware V1.30(ABXF.0)
-
USG Flex 700h - Fans/Temp Management
Hey Zyxel Team! I love my new 700h in my Homelab, but please please adjust the fans. They are spinning 10sec. normal, then 10sec. high and that on repeat. My CPU is at 12% and Memory on 59%. It wouldn't be a problem when it's an high permanently, but that normal/high switch every 10s is a little bit annoying. But so far…
-
Series H - Different SecuReporter details?
Hello everyone, I used to see this dashboard on SecuReporter, for example here you can see a view from a Flex100 site: That is different from the view seen on a Flex100HP site: I have the same situation comparing a Flex200: and Flex200H: What I have to do to have the same view everywhere? Is the Flex H series the new…
-
ikev2 remote vpn cannot connect to ZyXEl 200H recently
Hi, I was able to connect to the ZyXEl 200H via windows 11 vpn client using ikev2 vpn until this week. Out of the 10 computers using ikev2 vpn to connect remotely, only 3 computers are having similar problem. It connected and after a few second it disconnects. Now I cannot connect at all after I try resetting my vpn…
-
USG FLEX 200H - How to disable SecuReporter?
I'm receiving SecuReporter reports every week by email, even though SecurReporter is disabled. I have also looked in Nebula but I couldn't find any setting to disable weekly reports. Config: / vrf "main" secureporter "enabled" "false" / vrf "main" secureporter app-patrol "enabled" "false" / vrf "main" secureporter…
-
Authorize Link URL Address not working at all or correctly
USG FLEX 200H V1.20(ABWV.2) A whole load of problems Authorize Link URL Address by from interface LAN PC1 with SSL VPN on PC2 does not display the URL on PC1 by policy control rule to allow unless all policy control is disabled! Authorize Link URL Address by from interface missing WAN interfaces Authorize Link URL Address…
-
IKEv1 and IKEv2 many tunnels issues
USG FLEX 200H V1.21(ABWV.0)ITS-24WK35-0813-240800592 I have not fully tested traffic down the tunnels just going by status The test was between the FLEX200H and USG40 for three tunnels with each Phase 1 encryption being different AES128, 192 and 256 Test one FLEX200H IKEv1 all three tunnels nailed up to to connect to USG40…