-
Flex H, a rant
Hi, we sell Zyxeldevices for nearly 20 years now and through the announcement of the new "H"-Series (H stands for speed, you know?) i have the pleasure of setting up my first Flex 100H and what a journey it is: First the Box had the IP 192.168.168.1, strange but ok. I tried to register it to the Zyxel Portal but couln't,…
-
Configure bridge interface
Good morning, I have to replace an old Zywall USG100 with a USG FLEX 200H. In the old firewall I configured the WAN interface in dhcp and I have a WAN LAN bridge configured with static public IP (see attached screenshot). How can I replicate the configuration on the new one? I saw that in the FLEX I don't have the…
-
Flex 200H upgrade to V1.30(ABWV.1) - Lost name in DHCP reservation
Hello everyone, I moved from 1.21 to 1.30 patch 1 today. As you can see I lost almost ALL the custom name I assigned to DHCP reservation: This is the view I have AFTER the firmware upgrade: The firewall was able to keep ONLY 4 host names out of 24 customized. Same thing happened also with a 100HP: Same firmware upgrade,…
-
USG FLEX 500H reboots randomly
Hi we have multiple firewalls 500H after update from 1.20 to 1.30 the device randomly reboots we also applayed too 1.30(ABZH.1) firmware but the problem remains. What can we do so that it becomes stable again.
-
hostname
Buonasera ho configurato una vpn ssl su un USG FLEX100H. La vpn funziona regolarmente tranne per la traduzione degli hostname. In pratica il client remoto non riesce a collegarsi al server tramite la vpn utilizzando l'hostname. Grazie
-
Real DMZ type 2.1 broken in V1.3
USG FLEX 200H V1.30(ABWV.0) Well this is sad in V1.21 the traffic blocking worked fine but in V1.30 there is session dropping for the bridge due to how Real DMZ type 2.1 works. So what will happen is you can get to a site fine but then oven time the FLEX200H drops the session causing loading for the connection to restart…
-
GeoDB and signature security services back to defaut after FW 1.30 patch 1 update
hello FYI, after update from 1.30 to 1.30 patch 1, GeoDB back to defaut same for others security service signature manuel update works
-
FLEX 200H - detects infected files but passes them on
Hello, I have it FLEX 200 H - V1.21(ABWV.0)ITS-24WK35-m5760 device detects infected files but passes them on.
-
Where to enable NetBIOS broadcast over SSL VPN Tunnel
hello on my Zywall 110 i used SecuExtender 4.0.5.0 for SSL VPN for remote access with this configuration, when connected, i can access to remote drive with netbios name with my new USG Flex 200 H, i use OpenVpn for SSL VPN for remote access i can acces to remote drive only with IP adress is there an option to enable…
-
no resolution of hostname in device insight
hello on USG Flex 200 H, in device insight, i detect computer with ther mac but not hostname resolution : i use FW 1.30
-
USG FLEX 100H - CPU usage 20% in idle
Hi, Is this expected behavior that CPU utilisation is constantly around 20% for device that just sitting on the table - no devices behined, just connection to the internet? This is seen in device dashboard. Simon
-
Windows 10/11 VPN native client cannot connect to USG Flex 700H Remote Access VPN behind NAT router
Hi all, We can't manage to connect to our USG Flex 700H remote Access VPN using Windows 10/11 native client using Zyxel generated configuration files. The strange thing is that it works on android ! You'll find below all the setup and tests we've made, hope this could help 🙏 Here is our Setup : We have an USG Flex 700H…
-
Security Policy list slow
The Security Policy list becomes slow and buggy when it contains many entries. Please optimize the list performance! I suspect the list's responsiveness to mouse hovers is causing the slowdown.
-
NEBULAVPN Profile in Security Policy Control
Does anyone know what does NEBULAVPN_Outgoing and NEBULAVPN_to_Device do in the security policy control?
-
strongswan
-
revert back to 1.21 firmware
-
Static routes not working in this setup unless
USG FLEX 200H V1.30(ABWV.0) So due to real DMZ not quite working in V1.30 I wanted to redirect traffic for the WLAN to FLEX200 from FLEX200H so I did this and it now works but the rules need for FLEX200H should they be need in red? It was the case that WLAN on port 6 of the FLEX200H would of SNAT out the WAN2 port 2 and…
-
Migrate USG100 to USG FLEX 200H
Good morning, I should replace an old USG100 firewall with a USG FLEX 200H. Is it possible to migrate the configuration without having to do everything manually? I saw that there is a tool but I think it is not compatible with old models like USG100. Thank you
-
length of SMTP password for notifications
we just recently switched to SendGrid for our SMTP relaying, and the password is extremely long at 86 characters - which unfortunately our FLEX 500 only supports a password up to 63 characters… probably more of an enhancement request, but can the length of the password field get bumped up to 128 characters [or something…
-
FLEX 200H - how to restrict VPN access to a single AD group?
Hello I need to restrict SSL VPN access to a single group. Is it possible? Firmware V1.21(ABWV.0) thank you