-
Update firmware version help
Hi I would like to ask if there is a new version of firmware for my Zyxel modem? The model is ZYXEL AMG1302-T10D mypldt dsl is the network provider im in philippines...
-
NWA1123-AC HD - unable to access after any changes
NWA1123-AC HD PRO - trying to set this up. I am connected to my home network - making a few settings before setting up at work. If I try to change the basic ssid password - it is then impossible to connect to via wi fi. In fact the router is then impossible to connect to - period - even via a direct cable connection. I was…
-
How can I add a Wifi device which only supports WPS?
Hi, I have a business network with WAC6103D-I and NWA5123-AC. These accesspoint are managed with the USG60. I have wifi printer which supports only Wifi WPS configuration. How can I add these printers into the wifi?
-
NWA1123 Password After FW Update
I have just completed the firmware update to V211AAEO0C0 on my NWA1123-NI. Upon completion the AP seems to be working fine (SSIDs still broadcast and connectable). However, I tried to log back in to the AP using the default password of 1234 and cannot log in. I then attempted to log in using the password that I had set on…
-
Is there any way on controller to disconnect a station?
Is it possible for a client (station) forcing the controller to forcibly log out the client (station)?
-
NXC Master and Slave sync.
The NXC Master and Slave devices should be synchronized about the configuration and dynamic guest account.
-
WAC5302D-S: Managed mode support
Hello, this message is dedicated directly to Zyxel support staff. Please I need information about support for WAC5320S-D in managed mode. I know that this access point can operate in managed mode (Device user's guide WAC5302D-S_V5.00.pdf). I am trying to connect USG60W (AP Controller) with WAC5302D-S (Managed AP) without…
-
What is the maximum of managed APs for NXC if I buy the license?
Hi, What is the maximum of managed APs for NXC if I buy the license? I would like to know the information about NXC2500 and NXC5500.
-
The managed AP has to do time sync by CAPWAP with NXC,only NXC has to do NTP sync.
Within managed mode the AP has to do time sync by CAPWAP with NXC., only NXC has to do NTP sync. The AP does now try to sync. NTP at boot and every 24hours. Imaging the point you have 500 APs deployed in the Network and each single AP has to do its own NTP sync.Currently Ap will get NTP time from AC if we set up the AC as…
-
Hope NXC support USB storage for Wireless Frame Capture.
For troubleshooting in specific customer environment we require to record Wireless Frame capture for several Monitor AP during 2-3 days. As this is creating some amount of data we liked to use USB storage for Wireless Frame Capture Option but disappointing the USB storage only Support for "normal" wire capture. IK
-
How can I release IPs from the DHCP pool on NXC5200?
Hi, I use NXC5200 as my DHCP server, but the DHCP pool is full now. The new clients cannot get IP but there have too many redundant users, how can I release them???
-
NXC2500 Firmware 4.22. to 5.10
hi there, may i update Firmware from NXC2500 V4.22(AAIG.1) directly to NXC2500_5.10(KRACK_hotfix)? (all APs are NWA3560-N) thx
-
DOES USG210 supports different brand Access points
hello , i want to know does USG-210 supports different brands of AP if used as controller.
-
DOES USG-210 supports different brands of Access points
i want to know does USG-210 supports AP's of different brands if used as controller.
-
is AccessPoint nwa1123-ac affected by KRACK and will receive a firmware update?
"KRACK (short for Key Reinstallation AttaCK) targets the third step in a four-way authentication “handshake” performed when Wi-Fi client devices attempt to connect to a protected Wi-Fi network. The encryption key can be resent multiple times during step three, and if attackers collect and replay those retransmissions in…
-
About LoadBalance&Disassociate behavior
In two stand-alone APs configuration and the same SSID environment, we want to connect to another AP as up to 20 clients in one AP.So, I activated the LoadBalance function (By Station Number) and checked Disassociate station when overloaded. When two APs were connected with restriction set to 1, 2 or more connections were…
-
Zyxel WAC6502d not connecting to NCX2500
Hi My client noticed the absence of the usual Wifi SSID in one area of his hotel and asked me to investigate Apparently the local AP, a Zyxel WAC6502d, is now back to advertising it's default SSID : ZYXEL From what I gather it was initially setup in AC Discovery mode and the NCX2500 provided it with its running parameters…
-
Video broadcasting problem
Hi, We have a WAC6502D-S for e-learning system. Problem appears when broadcasting the videos from teacher laptop to student’s pad. The videos would be from sources: local harddisk, youtube, cloud server - VCD/SD video resolution ==> smooth transfer without delay and good buffering/ playing but the video quality is not good…
-
The client always not roaming to the new AP
Hi, there has 10 APs in my office and my colleges always claim their wifi not smooth. After I checked, it seems a roaming issue that the client always not roaming to the another AP. How can I improve it??
-
Wifi drops out
Hi We have a Zyxel VMG8924-B10A router and all works fine but every few days or so the wifi seems to completely disappear. If we log in to the router and go to the wireless section and click on 'apply' it seems to come back to life. Is there a setting that hides the SSID after a while or something? Can anyone please help?…