-
Adding a second NWA130BE WAP
I'm thinking of adding a second NWA130BE WAP but I have no idea how to proceed. What about mutual interference and channel assignments? How do I ensure roaming works well? Do I need a controller? Background: Ive just upgraded from having two 14 year old NWA3560-n (802.11n) WAPs. I set these up by hand with different config…
-
Nebula access point administration
Until last week I had 13 fully functional WAX510D. On friday last week five AP:s stopped showing SSID and clients could not connect. In Nebula they show up as fully functional and I can communicate with them. The AP:s on the other hand shows a blue led indicator which would mean that they are NOT in contact with Nebula.…
-
Unable to start ZyXEL AP Configurator
I get the following error when I start ZyXEL AP Configurator after the installation: Is there anything missing in the installation of the configurator?
-
Problem upload speed NWA50AX Firmware 7.0
Hi, I've installed the NWA50AX access point and connected it to a Zyxel FWA505 router via a 1G/Full LAN ethernet port (verified). In download, I receive the same speed that I receive by connecting to the wifi directly to the router, which is about 650mbps/700mbps, but in upload, the speed drops to 2mbps, while connected to…
-
Poor identification/connection to Zyxel nwa50ax pro
Dears, I'm by no means an expert so prior to start sharing set-up, I wonder how I should approach my issue. I do have a Zyxel NWA50AX PRO connected by internet cable to my router. On this AP I have installed both a 2.4 Ghz and a 5 Ghz wifi to send throughout my home and garden. Now I do experience, with both WIFI's,…
-
Wifi 6E
Why doesn't BandFlex work? I have an NWA130Be (AccesPoint) and all settings from 2.4 to 6.0 GHz work. Unfortunately I have no way to configure BandFlex.
-
New AP with ethernet port for computer etc
Good morningI'm looking for a wifi AP that also allows 1-4 ethernet connections, I saw this product, is it correct? ax3000-wifi-6-dual-radio-nebulaflex-pro-wall-plate-access-point-wax300h
-
V7.00 Patch 2 firmware release notes?
I see that v7.00 Patch 2 has been scheduled for installation in Nebula on my NWA90AX - V7.00(ACCV.2) NWA55AXE - V7.00(ABZL.2) NWA50AX - V7.00(ABYW.2) units. But I can not find any mention of this firmware in the Support sites or in the WirelessLAN New Release community. Could the release notes please be posted? Thanks.
-
I now have 2 NWA130BE APs and 1 NWA50AX-Pro
I have a some 2.4ghz devices now always disconnecting. Both my Chamberlain Garage door openers and my Abode Security cameras. I have tried every setting possible to make it better but nothing is working. Here is a snippet from the event log:
-
Resetting NWA55AXE to factory default
Hi. I am looking for a way to set the NWA55AXE to factory default. I do still have access to the device (in stand-alone mode), and I want to purge my config because I like to sell the AP. I only found this instruction below. Is this really the only way that I now have to oder a new Zyxel switch for the "neighboring"…
-
Click to continue Problem NWA 210 AX
Hallo, ich habe drei Accesspoints mit einer Gast SSID mit click to continue log in konfiguriert. Zwei NWA 210 AX und ein NWA 1123 AC pro. Der NWA 1123 AC Pro und ein NWA 210 AX sind per LAn Kabel angeschlossen und der zweite NWA 210 AX ist per smart Mesh mit dem ersten NWA 210 AX verbunden. Das Problem ist nun, dass das…
-
Remote AP with Wifi 7 AP
I'd like to test remote AP for a colleague of mine who works mostly at home. But have some questions where I can't find an answer on it: We use Nebula only for AP management, FLEX Firewalls and switches we still manage on premise and for the moment I'd like to keep it this way. Can I add a remote AP on Nebula who connects…
-
Speed issues
Hi. I have a Zyxel mobile router 5101 with a 5 G card which is connected to a mesh network based on three nwa130 BE When measuring download speed I get good figures from the router. The root ap are located just besides the router. When sitting only a few meters from both I get very different downspeed between the router…
-
NWA50AX
Hello, We've got 8 devices (NWA50AX), all are wired but one not. During setting, all were connected, smartmesh activated. in situ, the one wireless connected, is connected (we can see it under nebula), we can connect a device on (phone, pc), but no access to internet. The AP is well connected to the neighbor AP, and, from…
-
NWA130BE Web Help No Longer works. Online manual needs updating.
Webhelp no longer works with latest firmware update.
-
How to use the web CLI window
-
WBE660S VLAN
Hello I can configure the management Vlan1 by disabling the native function of vlan1. How to configure the other Vlans (vlan10, vlan20, etc...) in untagged. Each new Vlan created is automatically tagged. I would like them to be untagged. Thanks
-
On and off nwa130be
my meshnetwork continuously go on and off. See attached image. why is this happening. you have access to my account. <Delete due to privacy protection>
-
NWA55AXE - PoE adaptar
Hey, Firmware: V6.29(4) If I setup NWA55AXE as repeater and it is still connected to a PoE switch, then LED from NWA55AXE ethernet LED port is powered off. If I enable AP or root AP mode again, ethernet LED port is powered on again. Is there an intention behind this behavior? AP mode: ethernet LED port is powered on Root…
-
NWA50AX connected to a USG FLEX 50 (USG20-VPN)
I have added two NWA50AX APs to my USG FLEX 50 (USG20-VPN). I have them connected to my DMZ port and are working fine. I can monitor DHCP Status and see devices connection but I have no access to manage/connect to the APs. I would prefer not to use Nebula and only want to access through a web browser. My desktop is…
