-
[NWA130BE] Client stuck at low rate after idle, fails to recover on resumed activity
Environment: AP: NWA130BE, standalone mode (no Nebula) Client: iPad (A16), WiFi 6 (802.11ax), connected on 5 GHz Channel width: 80 MHz AP TX power: 18 dBm Symptom: Client correctly drops to a low rate while idle, but does not recover full rate when traffic resumes. Observed RX ~8 Mbit/s, TX ~6 Mbit/s on the client while…
-
NR7302 (ex-Telekom firmware): 0 Mbps Download / 0.5 Mbps Upload with Public IP SIM - Routing issue?
Hello Zyxel Community, I am facing a severe routing/NAT issue with a recently purchased used Zyxel NR7302 5G outdoor CPE and I'm hoping some experts here can point me in the right direction. The device has a custom carrier firmware (ex-Telekom). I am using it in Italy with an ISP called Alpsim (running on the WindTre…
-
50H bandwidth management dropped capacity?
Hello, I have fiber WAN with 100/100Mbps (Download/Upload). Always gives more than that typically 110/120Mbps. When I activate BWM in 50H, upload drops to max 80Mbps. No specific impact on download. And this happens even if there is only the Default rule in BWM, no other rules added. I have tested this with the ISP own…
-
WPA3 Enterprise 192bit encryption?
Hi. I finally got myself a WiFi7 device and decided to give WPA3 enterprise a try but I’m having issues with it connecting to the network with WPA3 it keeps on going down to WPA2 and WiFi6 ax. Does my wbe660s and nebula support 192 bit encryption and can I turn off transition mode on WPA3 enterprise? Googling gets me…
-
Default Zyxel AX7501-B0 password
Hey everyone After a brutal battle with my router that was ISP locked i managed to unpack and rebuild a working firmware i now am on the default ZYXEL page that does not have the isp's logo on it the issue i am now facing is that there is a password i do not know it is not the one on the sticker nor is it admin :…
-
[FWA515] - Speedtest diagnostic, error in bandwidth speed
Hello, I've connected the FWA515 to a 2.5Gb WAN. The internet connection is via a 2.5Gb fiber optic and a 2.5Gb ONT. After launch the speedtest, this was the result: ###AutoSpeedTest downloading CLIENT config...... ###AutoSpeedTest downloading SERVER URL List...... ###AutoSpeedTest select SERVER URL: speedtest.23m.com…
-
NR2101 firmware V1.00(ABUS.1)b177
Unable to upgrade from this version. Need some help. Thanks
-
NR2101 and firmware V1.00(ABUS.1)b177
I can't update my firmware from V1.00(ABUS.1)b177. I am having issues with dropping and the router refusing to connect. What do I need to do to get on the latest firmware?
-
NR2101 firmware V1.00(ABUS.1)b177
I just got an NR2101 and am stuck on firmware V1.00(ABUS.1)b177 (which I believe is a beta) and can't update. I've downloaded the .zip files, but it gives me an error that it is incorrect. How do I move off of the beta firmware. I'm having 5G drops and other issues which I think can be resolved by getting onto the latest…
-
Wi-Fi network name doesn't match the one listed on the device
I bought a new router NR5103E , but I’m having a problem where the actual Wi-Fi network name doesn't match the one listed on the device. I tried a factory reset, but the issue persists; I suspect the sticker on the back doesn't actually belong to this specific unit. I also tried accessing the 192.168.1.1 configuration page…
-
Zyxel NR7302 with Telekom Firmware not working with Telekom SIM
Hi, I purchased the Zyxel NR7302 with Telekom Firmware via the official Zyxel Amazon Store. I installed the device with a Telekom SIM Card but had to change the APN address from "update.telekom" to "internet.telekom" for the SIM to be able to connect to the internet. This works fine. After several days, I noticed that the…
-
Sunrise AX7501-B0 CFE bootloader password
hey, so i bought an AX7501-B0 second hand for 40 chf, it has sunrise firmware on it and i want to use it with init7 fiber7. basically everything is locked down, no firmware upload in the web ui, ssh is blocked. i managed to get uart serial working with a raspberry pi and i can see the cfe bootloader but it asks for a…
-
Mycloud agent Nas326 cannot connect to zyxel cloud
Hi we know that model Nas326 is out of EOL but we cannot use your Mycloud network is says invalid certificate and cannot pair the unit with serial number Reason: SSL peer presented an invalid certificate Any help for this or workaround Regards Igor
-
NR7103 Can't change any setting in web gui.
When i type 192.169.1.1 the web gui shows up with out any login. Empty page with the Zyxel logo in upper right corner. I can choose from meny but nothing happens. When I try to logout ill get message that it failed to logout. Tried to reset but no changes.
-
Can't access NR5103EV2 GUI
Hi, I have the same problem as others previous got solved. I can't access the GUI of my NR5103EV2 router. I have tried resetting and reached out to three but they can't help. My S/N is S230Z45001084. Please can someone send me my password as @Friday previously did for others. Thank you!
-
FWA515 – WLAN Scheduler does not automatically switch Wi-Fi on/off at scheduled times
Hello, I have a Zyxel FWA515 and I am experiencing a problem with the WLAN Scheduler. Device: Zyxel FWA515 Firmware: 1.70(ACPZ.1)C0 Location: Italy Nebula: The device was previously registered in Nebula, but I also tested the WLAN Scheduler after disconnecting the router from Nebula, with exactly the same result. The WLAN…
-
where to download latest firmware V1.00(ABQU.6)C0 in August 2024 for LTE3301-PLUS
I have a LTE3301-PLUS without Nebula service and firmware V1.00(ABQU.5)C0 installed. googleing for a new firmeware resulted in this web page: https://www.zyxel.com/service-provider/global/en/security-advisories/zyxel-security-advisory-buffer-overflow-vulnerabilities-some-5g-nr4g-lte-cpe-dslethernet-cpe-fiber-05-21-2024…
-
Zyxel NR7303-EU Admin password
Hello, I have a Zyxel NR7303-EU supplied with my TIM FWA connection. I can access the Web Configurator at 192.168.1.1, but the device label does not show the admin password. I need access to the Web Configurator to check the mobile network and signal status because I am experiencing recurrent connection problems. Could you…
-
VMG3625-T50B Firmware Update Download Link V5.50(ABPM.9.8)C0
VMG3625-T50B Modem Current Firmware Version: V5.50(ABPM.9.4)C0 Request: For security reasons, I would like to download firmware version 5.50(ABPM.9.8)C0. However, it is not listed on your support page. According to your security advisory page at the link below, I should be able to access it. Thank you. Reference…
-
AX7501-B0 ROUTER firmware
Hi all, I am not able to find the latest AX7501-B0 firmware - where can I download it? I saw the last one should be V5.17(ABPC.7)C0 from Oct 22, 2025, right? Cheers