WiFi 7 AP Mesh Capability As we move forward with the implementation of WiFi 7 APs, it's essential to understand the changes and limitations regarding mesh capabilities. This update will recap our current mesh technologies and highlight how they apply to our new WiFi 7 APs. Overview of Mesh Technologies We currently…
For users who have the requirement to build up a network environment but lack the environmental condition to deploy cables in their scenarios Mesh is an option for users to enlarge the signal coverage via the wireless connection between APs. MESH on the APs managed by the controller, we called “ZyMesh”. There is the…
The example instructs how to set up ZyMesh. When AP’s signal needs to extend, use ZyMesh to set up connection between root AP and repeater AP. Because ZyMesh profile makes the WDS connection, the root AP and repeater AP don’t need to use the same SSID for users connecting. Configure ZyMesh Profile 1 Both root AP and…
If there are over two repeater APs connect the one root AP or the two hops of WDS link in your scenario, you can add the uplink AP's mac address manually to avoid repeater AP connect to the wrong AP. Scenario 1: Two repeater APs connect to the one root AP Scenario 2: Two hops of WDS link Access the uplink AP and check the…
Yes, when the AP is set to repeater mode, the bridge mode is disabled by default. To enable bridging, select the option "Enable Wireless Bridging" when you set up a repeater AP. CONFIGURATION > Wireless > AP Management > Mgnt. AP List > Edit Note: The topology of wireless bridge LAN: At the time of writing, only the…
It looks like you're new here. Sign in or register to get started.